Physics Circle home Home Practice Hub Register / Login

Home›Practice Hub›Chapters›Heat Transfer and Radiation

Physics PYQs · MHT CET · JEE Main · NEET

Heat Transfer and Radiation

Questions
185
MHT CET
137
JEE Main
36
NEET
12
Years
1993–2026
0 of 185 attemptedPick an answer to see the solution

Q1MHT CET 2026 · 13 APR · SHIFT 2Easy

Heat Conduction · Thermal conductivity & rate of heat flow

The coefficient of thermal conductivity of a metal rod depends on its

Show answer and solution

Answer: (c)

  1. In Qt=KAΔTL\frac{Q}{t} = \frac{KA\Delta T}{L}, KK is a property of the material only.
  2. Area, mass and length change the heat flow, not KK.
  3. So the answer is (c) material of the rod.
Report a mistake
Q2MHT CET 2026 · 13 MAY · SHIFT 1Easy

Heat Conduction · Composite rods, slabs & junction temperature

Two rods A and B are of equal lengths. Their ends are kept between the same temperatures and their area cross-sections are A1A_1 and A2A_2, thermal conductivities are K1K_1 and K2K_2. The rate of heat transmission in the two rods will be equal if

Show answer and solution

Answer: (b)

  1. H=KAΔTLH = \frac{KA\Delta T}{L} with the same LL and ΔT\Delta T for both rods.
  2. H1=H2⇒K1A1=K2A2H_1 = H_2 \Rightarrow K_1A_1 = K_2A_2
  3. So the answer is (b).
Report a mistake
Q3MHT CET 2026 · 18 APR · SHIFT 1Easy

Heat Conduction · Composite rods, slabs & junction temperature

The ratio of thermal conductivity of two rods of different materials is 4:34 : 3. The two rods have same area of cross-section and same thermal resistance. The lengths of rods are in the ratio

Show answer and solution

Answer: (b)

  1. Thermal resistance R=LKAR = \frac{L}{KA}; same RR and AA gives L∝KL \propto K.
  2. L1L2=K1K2=43\frac{L_1}{L_2} = \frac{K_1}{K_2} = \frac{4}{3}
  3. So the answer is (b) 4:34:3.
Report a mistake
Q4MHT CET 2026 · 15 APR · SHIFT 2Easy

Heat Conduction · Composite rods, slabs & junction temperature

The ratio of the thermal conductivity of two rods of different materials is 6:5. The two rods of same area of cross section and same thermal resistance will have the length in the ratio

Show answer and solution

Answer: (b)

  1. Thermal resistance R=LKAR = \frac{L}{KA}; same RR and AA gives L∝KL \propto K.
  2. L1L2=K1K2=65\frac{L_1}{L_2} = \frac{K_1}{K_2} = \frac{6}{5}
  3. So the answer is (b) 6:56:5.
Report a mistake
Q5MHT CET 2026 · 16 APR · SHIFT 1Medium

Heat Conduction · Thermal conductivity & rate of heat flow

Rate of flow of heat through a cylindrical rod is 'H1H_1 '. The temperature at the ends of the rod are T1T_1 and T2T_2. If all the dimensions of the rod become double and the temperature difference remains the same and if the rate of flow of heat becomes 'H2H_2 ' then H2=H_2 =

Show answer and solution

Answer: (c)

  1. H=KAΔTLH = \frac{KA\Delta T}{L}, with A=πr2A = \pi r^2.
  2. Doubling all dimensions: A→4AA \to 4A, L→2LL \to 2L.
  3. H2=42H1=2H1H_2 = \frac{4}{2}H_1 = 2H_1, so the answer is (c).
Report a mistake
Q6MHT CET 2026 · 12 MAY · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

Three rods made of the same material and the same cross-sectional areas have been joined as shown in the figure. Each rod is of the same length. The temperature of the junction is

Figure

Show answer and solution

Answer: (a)

  1. All rods are identical, so each has the same resistance. Heat in from the two hot rods equals heat out through the cold rod.
  2. 2(90−θ)=θ−02(90-\theta) = \theta - 0
  3. 3θ=180⇒θ=60∘C3\theta = 180 \Rightarrow \theta = 60^\circ\text{C}, so the answer is (a).
Report a mistake
Q7MHT CET 2026 · 20 APR · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two rods of same length, radius and material transfer a given amount of heat in 't' second when they are joined as shown in fig (1). But when they are joined as shown in fig (2) then they will transfer same heat in same condition in time

Figure

Show answer and solution

Answer: (c)

  1. Let each rod have resistance RR. Fig (1) is parallel: R1=R2R_1 = \frac{R}{2}. Fig (2) is series: R2=2RR_2 = 2R.
  2. For the same heat and ΔT\Delta T, time t∝t \propto thermal resistance.
  3. t2=2RR/2 t=4tt_2 = \frac{2R}{R/2}\,t = 4t, so the answer is (c).
Report a mistake
Q8MHT CET 2026 · 17 APR · SHIFT 2Medium

Heat Conduction · Composite rods, slabs & junction temperature

In a composite slab there are two materials having coefficients of thermal conductivity K and 2K, thickness x and 4x repectively. The temperature of the two outer surfaces of a composite slab are T2T_2 and T1 (T2>T1). T2T_1\ (T_2 > T_1).\ T_2 is on side K and T1T_1 is on side 2K. The rate of heat transfer through the slab in a steady state is [A(T2−T1)Kx]⋅f\left[\frac{A(T_2-T_1)K}{x}\right] \cdot f, where f is equal to

Show answer and solution

Answer: (d)

  1. Series resistances: R=xKA+4x2KA=3xKAR = \frac{x}{KA} + \frac{4x}{2KA} = \frac{3x}{KA}
  2. H=T2−T1R=A(T2−T1)Kx⋅13H = \frac{T_2-T_1}{R} = \frac{A(T_2-T_1)K}{x}\cdot\frac{1}{3}
  3. So f=13f = \frac{1}{3}, answer (d).
Report a mistake
Q9MHT CET 2026 · 17 APR · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

Consider two rods 1 and 2 of same length. They have different specific heats (C1,C2)(C_1, C_2), thermal conductivities (K1,K2)(K_1, K_2) and area of cross-section (A1,A2)(A_1, A_2) respectively. Both the rods have temperatures (T1,T2)(T_1, T_2) at their ends. If their rate of loss of heat due to conduction is equal, then

Show answer and solution

Answer: (b)

  1. Conduction rate H=KAΔTLH = \frac{KA\Delta T}{L} does not involve specific heat.
  2. Same LL and ΔT\Delta T: H1=H2⇒A1K1=A2K2H_1 = H_2 \Rightarrow A_1K_1 = A_2K_2
  3. So the answer is (b).
Report a mistake
Q10JEE Main 2026 · 22 JAN · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

Rods xx and yy of equal dimensions but of different materials are joined as shown in figure. Temperatures of end points AA and FF are maintained at 100∘C100^\circ\text{C} and 40∘C40^\circ\text{C} respectively. Given the thermal conductivity of rod x\text{rod } x is three times of that of rod y\text{rod } y, the temperature at junction points BB and EE are (close to):

Figure

Show answer and solution

Answer: (c)

A 100°CBEF 40°Cr3r3rrr3r
  1. Kx=3KyK_x = 3K_y, so take resistance of an xx rod =r= r and a yy rod =3r= 3r.
  2. B to E: path BCE =6r= 6r in parallel with path BDE =2r= 2r, giving 6×28r=1.5r\frac{6 \times 2}{8}r = 1.5r.
  3. Total =r+1.5r+3r=5.5r= r + 1.5r + 3r = 5.5r; current H=605.5r≈10.9rH = \frac{60}{5.5r} \approx \frac{10.9}{r}
  4. TB=100−10.9≈89∘CT_B = 100 - 10.9 \approx 89^\circ\text{C}, TE=40+3(10.9)≈73∘CT_E = 40 + 3(10.9) \approx 73^\circ\text{C}
  5. So the answer is (c).
Report a mistake
Q11MHT CET 2026 · 11 APR · SHIFT 1Difficult

Heat Conduction · Composite rods, slabs & junction temperature

Three identical heat conducting rods are connected in series as shown in the figure. The rods on the side have thermal conductivity 2K2K while that in the middle has thermal conductivity KK. The left end of the combination is maintained at temperature 3T3T and the right end at TT. The rods are thermally insulated from outside. In steady state, temperature at the left junction is T1T_1 and that at the right junctions is T2T_2. The ratio T1/T2T_1/T_2 is

Figure

Show answer and solution

Answer: (c)

  1. Resistance of a 2K2K rod =R= R, of the KK rod =2R= 2R; total =4R= 4R for a drop of 3T−T=2T3T - T = 2T.
  2. Drop per RR =2T4=T2= \dfrac{2T}{4} = \dfrac{T}{2}
  3. T1=3T−T2=5T2T_1 = 3T - \dfrac{T}{2} = \dfrac{5T}{2}, T2=T+T2=3T2T_2 = T + \dfrac{T}{2} = \dfrac{3T}{2}
  4. So the answer is (c) T1T2=53\dfrac{T_1}{T_2} = \dfrac{5}{3}.
Report a mistake
Q12MHT CET 2025 · 22 APR · SHIFT 2Easy

Heat Conduction · Thermal conductivity & rate of heat flow

The two ends of a rod of length ' xx ' and uniform cross-sectional area ' A ' are kept at temperatures ' T1T_1 ' and ' T2T_2 ' respectively ( T1>T2T_1 > T_2 ). If the rate of heat transfer is ' Q/tQ/t ', through the rod in steady state, then the coefficient of thermal conductivity ' K ' is

Show answer and solution

Answer: (b)

  1. Fourier's law: Qt=KA(T1−T2)x\frac{Q}{t} = \frac{KA(T_1-T_2)}{x}
  2. Rearranging: K=xQtA(T1−T2)K = \frac{xQ}{tA(T_1-T_2)}
  3. So the answer is (b).
Report a mistake
Q13JEE Main 2025 · 29 JAN · SHIFT 2Easy

Heat Conduction · Thermal conductivity & rate of heat flow

The difference of temperature in a material can convert heat energy into electrical energy. To harvest the heat energy, the material should have

Show answer and solution

Answer: (a)

  1. A thermoelectric material must keep a temperature difference across it, so it needs low thermal conductivity.
  2. It must carry the generated current easily, so it needs high electrical conductivity.
  3. So the answer is (a).
Report a mistake
Q14MHT CET 2025 · 19 APR · SHIFT 2Medium

Heat Conduction · Composite rods, slabs & junction temperature

A composite slab consists of two materials having coefficients of thermal conductivity K and 2K2K, thickness xx and 4x4x respectively. The temperatures of two outer surfaces of a composite slab are T2T_2 and T1T_1 respectively (T2>T1)(T_2 > T_1). The rate of heat transfer through the slab in a steady state is [A(T2−T1)Kx]f\left[\frac{A(T_2-T_1)K}{x}\right] f, where ff is equal to

Show answer and solution

Answer: (d)

  1. Series resistances: R=xKA+4x2KA=3xKAR = \frac{x}{KA} + \frac{4x}{2KA} = \frac{3x}{KA}
  2. H=T2−T1R=A(T2−T1)Kx⋅13H = \frac{T_2-T_1}{R} = \frac{A(T_2-T_1)K}{x}\cdot\frac{1}{3}
  3. So f=13f = \frac{1}{3}, answer (d).
Report a mistake
Q15NEET 2025Medium

Heat Conduction · Composite rods, slabs & junction temperature

Three identical heat conducting rods are connected in series as shown in the figure. The rods on the sides have thermal conductivity 2K2K while that in the middle has thermal conductivity KK. The left end of the combination is maintained at temperature 3T3T and the right end at TT. The rods are thermally insulated from outside. In steady state, temperature at the left junction is T1T_1 and that at the right junction is T2T_2. The ratio T1/T2T_1/T_2 is

Figure

Show answer and solution

Answer: (a)

  1. R=LKAR = \frac{L}{KA}: the 2K2K rods have resistance rr, the middle KK rod has 2r2r; total 4r4r.
  2. Total drop 3T−T=2T3T - T = 2T, so the drop per rr is T2\frac{T}{2}.
  3. T1=3T−T2=5T2T_1 = 3T - \frac{T}{2} = \frac{5T}{2}, T2=5T2−T=3T2T_2 = \frac{5T}{2} - T = \frac{3T}{2}
  4. T1T2=53\frac{T_1}{T_2} = \frac{5}{3}, so the answer is (a).
Report a mistake
Q16JEE Main 2025 · 7 APR · SHIFT 2Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two cylindrical rods A and B made of different materials, are joined in a straight line. The ratios of lengths, radii and thermal conductivities of these rods are: LALB=12, rArB=2\frac{L_A}{L_B} = \frac{1}{2},\ \frac{r_A}{r_B} = 2 and KAKB=12\frac{K_A}{K_B} = \frac{1}{2}. The free ends of rods A and B are maintained at 400 K, 200 K, respectively. The temperature of rods interface is ______________ KK, when equilibrium is established.

Numerical answer type. Work it out, then open the answer.

Show answer and solution

Answer: 360

  1. Thermal resistance R=LKπr2R = \dfrac{L}{K\pi r^2}, so RARB=LALB⋅KBKA⋅rB2rA2=12⋅2⋅14=14\dfrac{R_A}{R_B} = \dfrac{L_A}{L_B}\cdot\dfrac{K_B}{K_A}\cdot\dfrac{r_B^2}{r_A^2} = \dfrac{1}{2}\cdot 2\cdot\dfrac{1}{4} = \dfrac{1}{4}
  2. In series the temperature drop divides in ratio of resistances: drop across A =200×15=40= 200\times\dfrac{1}{5} = 40 K
  3. Interface temperature =400−40=360= 400 - 40 = 360 K
Report a mistake
Q17JEE Main 2025 · 22 JAN · SHIFT 1Difficult

Heat Conduction · Thermal conductivity & rate of heat flow

Three conductors of same length having thermal conductivity k1,k2k_1, k_2 and k3k_3 are connected as shown in figure.

Figure

Area of cross sections of 11st and 22nd conductor are same and for 33rd conductor it is double of the 11st conductor. The temperatures are given in the figure. In steady state condition, the value of θ\theta is _________ ∘C^\circ\text{C}. (Given: k1=60 J s−1 m−1 K−1, k2=120 J s−1 m−1 K−1, k3=135 J s−1 m−1 K−1k_1 = 60\text{ J s}^{-1}\text{ m}^{-1}\text{ K}^{-1},\ k_2 = 120\text{ J s}^{-1}\text{ m}^{-1}\text{ K}^{-1},\ k_3 = 135\text{ J s}^{-1}\text{ m}^{-1}\text{ K}^{-1})

Numerical answer type. Work it out, then open the answer.

Show answer and solution

Answer: 40

  1. Rods 1 and 2 are in parallel between 100∘100^\circC and θ\theta; rod 3 (area 2A2A) carries the same total heat from θ\theta to 0∘0^\circC.
  2. (k1+k2)A(100−θ)l=k3(2A)θl\dfrac{(k_1+k_2)A(100-\theta)}{l} = \dfrac{k_3(2A)\theta}{l}
  3. 180(100−θ)=270θ⇒450θ=18000180(100-\theta) = 270\theta \Rightarrow 450\theta = 18000
  4. θ=40∘\theta = 40^\circC
Report a mistake
Q18NEET 2024Easy

Heat Conduction · Thermal conductivity & rate of heat flow

Given below are two statements: One is labelled as Assertion A\mathbf{A} and the other is labelled as Reason R\mathbf{R}.

Assertion A: Houses made of concrete roofs overlaid with foam keep the room hotter during summer.

Reason R: The layer of foam insulation prohibits heat transfer, as it contains air pockets. In the light of the above statements, choose the correct answer from the options given below.

Show answer and solution

Answer: (b)

  1. Foam with trapped air is a poor conductor, so it blocks heat flow: R is true.
  2. Blocking heat entering from the hot roof keeps the room cooler in summer, not hotter: A is false.
  3. So the answer is (b) A is false but R is true.
Report a mistake
Q19MHT CET 2024 · 15 MAY · SHIFT 2Medium

Heat Conduction · Thermal conductivity & rate of heat flow

A cylindrical rod is having temperatures θ1\theta_1 and θ2\theta_2 at its ends. The rate of heat flow is Q J/sQ\text{ J/s}. All the linear dimensions of the rod are doubled by keeping the temperature constant. The new rate of flow of heat is

Show answer and solution

Answer: (b)

  1. Q=KAΔθLQ = \frac{KA\Delta\theta}{L}, with A=πr2A = \pi r^2.
  2. Doubling all linear dimensions: A→4AA \to 4A, L→2LL \to 2L.
  3. New rate =42Q=2Q= \frac{4}{2}Q = 2Q, so the answer is (b).
Report a mistake
Q20MHT CET 2024 · 2 MAY · SHIFT 2Medium

Heat Conduction · Thermal conductivity & rate of heat flow

Rate of flow of heat through a cylindrical rod is ' H1H_1 '. The temperature at the ends of the rod are ' T1T_1 ' and ' T2T_2 '. If all the dimensions of the rod become double and the temperature difference remains the same, the rate of flow of heat becomes ' H2H_2 '. Then

Show answer and solution

Answer: (b)

  1. H=KAΔTLH = \frac{KA\Delta T}{L}, with A=πr2A = \pi r^2.
  2. Doubling all dimensions: A→4AA \to 4A, L→2LL \to 2L.
  3. H2=2H1H_2 = 2H_1, so the answer is (b).
Report a mistake
Q21MHT CET 2024 · 4 MAY · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two rods of same length \& material transfer a given amount of heat in 12 s when they are joined end to end. But when they are joined length wise parallel to each other they will transfer same amount of heat in same condition in time

Show answer and solution

Answer: (b)

  1. Each rod has resistance RR. End to end (series): 2R2R. Side by side (parallel): R2\frac{R}{2}.
  2. Time ∝\propto resistance, so the time drops by a factor of 4.
  3. t=124=3 st = \frac{12}{4} = 3\ \text{s}, so the answer is (b).
Report a mistake
Q22MHT CET 2023 · 13 MAY · SHIFT 2Easy

Heat Conduction · Thermal conductivity & rate of heat flow

Which one of the following is based on convection?

Show answer and solution

Answer: (b)

  1. A room heater warms air near it; the hot air rises and cool air sinks, setting up convection currents.
  2. Utensil and iron rod heat by conduction; Sun to Earth is radiation.
  3. So the answer is (b) heating a room by heater.
Report a mistake
Q23MHT CET 2023 · 13 MAY · SHIFT 1Easy

Heat Conduction · Thermal conductivity & rate of heat flow

The temperature gradient in a rod of length 75 cm75\text{ cm} is 40∘C/m40^\circ\text{C/m}. If the temperature of cooler end of the rod is 10∘C10^\circ\text{C}, then the temperature of hotter end is

Show answer and solution

Answer: (b)

  1. Temperature difference =gradient×length=40×0.75=30∘C= \text{gradient} \times \text{length} = 40 \times 0.75 = 30^\circ\text{C}
  2. Hot end =10+30=40∘C= 10 + 30 = 40^\circ\text{C}
  3. So the answer is (b) 40∘C40^\circ\text{C}.
Report a mistake
Q24MHT CET 2023 · 11 MAY · SHIFT 1Easy

Heat Conduction · Thermal conductivity & rate of heat flow

The rate of flow of heat through a metal rod with temperature difference 40∘C40^\circ\text{C} is 1600 cal/s1600\text{ cal/s}. The thermal resistance of metal rod in ∘C s/cal^\circ\text{C s/cal} is

Show answer and solution

Answer: (a)

  1. Thermal resistance R=ΔTHR = \frac{\Delta T}{H}
  2. R=401600=0.025 ∘C s/calR = \frac{40}{1600} = 0.025\ ^\circ\text{C s/cal}
  3. So the answer is (a) 0.025.
Report a mistake
Q25MHT CET 2023 · 12 MAY · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

A composite slab consists of two materials having coefficient of thermal conductivity KK and 2K2K, thickness xx and 4x4x respectively. The temperature of the two outer surfaces of a composite slab are T2T_2 and T1 (T2>T1)T_1\ (T_2 > T_1). The rate of heat transfer through the slab in a steady state is [A(T2−T1)Kx]⋅f\left[\frac{A(T_2-T_1)K}{x}\right] \cdot f where 'ff' is equal to

Show answer and solution

Answer: (d)

  1. Series resistances: R=xKA+4x2KA=3xKAR = \frac{x}{KA} + \frac{4x}{2KA} = \frac{3x}{KA}
  2. H=T2−T1R=A(T2−T1)Kx⋅13H = \frac{T_2-T_1}{R} = \frac{A(T_2-T_1)K}{x}\cdot\frac{1}{3}
  3. So f=13f = \frac{1}{3}, answer (d).
Report a mistake
Q26JEE Main 2023 · 13 APR · SHIFT 2Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two plates A\text{A} and B\text{B} have thermal conductivities 84 W m−1 K−184\text{ W m}^{-1}\text{ K}^{-1} and 126 W m−1 K−1126\text{ W m}^{-1}\text{ K}^{-1} respectively. They have same surface area and same thickness. They are placed in contact along their surfaces. If the temperatures of the outer surfaces of A\text{A} and B\text{B} are kept at 100∘C100^\circ\text{C} and 0∘C0^\circ\text{C} respectively, then the temperature of the surface of contact in steady state is _____________ ∘C^\circ\text{C}.

Numerical answer type. Work it out, then open the answer.

Show answer and solution

Answer: 40

  1. Same area and thickness: R∝1KR \propto \dfrac{1}{K}, so RARB=12684=32\dfrac{R_A}{R_B} = \dfrac{126}{84} = \dfrac{3}{2}
  2. Drop across A =100×35=60∘= 100\times\dfrac{3}{5} = 60^\circC
  3. Contact temperature =100−60=40∘= 100 - 60 = 40^\circC
Report a mistake
Q27JEE Main 2022 · 24 JUN · SHIFT 1Medium

Heat Conduction · Thermal conductivity & rate of heat flow

Two metallic blocks M1 and M2 of same area of cross-section are connected to each other (as shown in figure). If the thermal conductivity of M2 is K then the thermal conductivity of M1 will be: [Assume steady state heat conduction]

Figure

Show answer and solution

Answer: (b)

  1. Same heat current through both blocks: K1A(100−80)16=KA(80−0)8\frac{K_1A(100-80)}{16} = \frac{KA(80-0)}{8}
  2. 20K116=10K\frac{20K_1}{16} = 10K
  3. K1=8KK_1 = 8K, so the answer is (b).
Report a mistake
Q28NEET 2022 · PHASE 2Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two rods one made of copper and other made of steel of same length and same cross sectional area are joined together. The thermal conductivity of copper and steel are 385 J s−1{}^{-1} K−1{}^{-1} m−1{}^{-1} and 50 J s−1{}^{-1} K−1{}^{-1} m−1{}^{-1} respectively. The free ends of copper and steel are held at 100∘^\circC and 0∘^\circ C respectively. The temperature at the junction is, nearly:

Show answer and solution

Answer: (a)

  1. Same heat current in both rods (same LL, AA): 385(100−θ)=50(θ−0)385(100-\theta) = 50(\theta - 0)
  2. 435θ=38500435\theta = 38500
  3. θ≈88.5∘C\theta \approx 88.5^\circ\text{C}, so the answer is (a).
Report a mistake
Q29JEE Main 2022 · 27 JUL · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

If K1K_1 and K2K_2 are the thermal conductivities, L1L_1 and L2L_2 are the lengths and A1A_1 and A2A_2 are the cross sectional areas of steel and copper rods respectively such that K2K1=9, A1A2=2, L1L2=2\frac{K_2}{K_1} = 9,\ \frac{A_1}{A_2} = 2,\ \frac{L_1}{L_2} = 2. Then, for the arrangement as shown in the figure, the value of temperature TT of the steel - copper junction in the steady state will be:

Figure

Show answer and solution

Answer: (c)

  1. Steel: Rs=L1K1A1R_s = \frac{L_1}{K_1A_1}. Copper: Rc=L2K2A2=L1/29K1⋅A1/2=Rs9R_c = \frac{L_2}{K_2A_2} = \frac{L_1/2}{9K_1 \cdot A_1/2} = \frac{R_s}{9}
  2. Same heat current: 450−TRs=T−0Rs/9\frac{450 - T}{R_s} = \frac{T - 0}{R_s/9}
  3. 450−T=9T⇒T=45∘C450 - T = 9T \Rightarrow T = 45^\circ\text{C}, so the answer is (c).
Report a mistake
Q30JEE Main 2022 · 29 JUN · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

As per the given figure, two plates A and B of thermal conductivity K and 2 K are joined together to form a compound plate. The thickness of plates are 4.0 cm and 2.5 cm respectively and the area of cross-section is 120 cm2 for each plate. The equivalent thermal conductivity of the compound plate is (1+5α)\left(1 + \frac{5}{\alpha}\right) K, then the value of α\alpha will be ______________.

Figure

Numerical answer type. Work it out, then open the answer.

Show answer and solution

Answer: 21

  1. Plates in series: L1+L2Keq=L1K1+L2K2\dfrac{L_1+L_2}{K_{eq}} = \dfrac{L_1}{K_1} + \dfrac{L_2}{K_2}
  2. 6.5Keq=4K+2.52K=5.25K⇒Keq=6.55.25K=2621K\dfrac{6.5}{K_{eq}} = \dfrac{4}{K} + \dfrac{2.5}{2K} = \dfrac{5.25}{K} \Rightarrow K_{eq} = \dfrac{6.5}{5.25}K = \dfrac{26}{21}K
  3. 2621=1+521\dfrac{26}{21} = 1 + \dfrac{5}{21}
  4. So α=21\alpha = 21
Report a mistake
Q31JEE Main 2022 · 26 JUL · SHIFT 2Difficult

Heat Conduction · Thermal conductivity & rate of heat flow

An ice cube of dimensions 60 cm×50 cm×20 cm60\text{ cm} \times 50\text{ cm} \times 20\text{ cm} is placed in an insulation box of wall thickness 1 cm1\text{ cm}. The box keeping the ice cube at 0∘C0^\circ\text{C} of temperature is brought to a room of temperature 40∘C40^\circ\text{C}. The rate of melting of ice is approximately:

(Latent heat of fusion of ice is 3.4×105 J kg−13.4 \times 10^{5}\text{ J kg}^{-1} and thermal conducting of insulation wall is 0.05 W m−1 ∘C−10.05\text{ W m}^{-1}\,{}^\circ\text{C}^{-1})

Show answer and solution

Answer: (b)

  1. Wall area =2(0.6×0.5+0.5×0.2+0.6×0.2)=1.04 m2= 2(0.6\times0.5 + 0.5\times0.2 + 0.6\times0.2) = 1.04\ \text{m}^2
  2. H=KAΔTd=0.05×1.04×400.01=208H = \dfrac{KA\Delta T}{d} = \dfrac{0.05\times1.04\times40}{0.01} = 208 W
  3. Rate of melting =HL=2083.4×105≈6.1×10−4= \dfrac{H}{L} = \dfrac{208}{3.4\times10^{5}} \approx 6.1\times10^{-4} kg/s
  4. So the answer is (b) 61×10−561\times10^{-5} kg s−1^{-1}.
Report a mistake
Q32MHT CET 2021 · 24 SEP · SHIFT 1Easy

Heat Conduction · Thermal conductivity & rate of heat flow

The temperature difference between two sides of an iron plate, 1.8 cm1.8\text{ cm} thick is 9∘C9^\circ\text{C}. Heat is transmitted through the plate 10 kcal/s m210\text{ kcal/s m}^2 at steady state. The thermal conductivity of iron is

Show answer and solution

Answer: (a)

  1. Heat flux HA=KΔTd⇒K=(H/A) dΔT\frac{H}{A} = \frac{K\Delta T}{d} \Rightarrow K = \frac{(H/A)\,d}{\Delta T}
  2. K=10×0.0189=0.02 kcal m−1s−1 ∘C−1K = \frac{10 \times 0.018}{9} = 0.02\ \text{kcal m}^{-1}\text{s}^{-1}\,{}^\circ\text{C}^{-1}
  3. So the answer is (a).
Report a mistake
Q33MHT CET 2021 · 22 SEP · SHIFT 2Easy

Heat Conduction · Thermal conductivity & rate of heat flow

The rate of flow of heat through a copper rod with temperature difference 28∘C28^\circ\text{C} is 1400 cal s−11400\text{ cal s}^{-1}. The thermal resistance of copper rod will be

Show answer and solution

Answer: (b)

  1. Thermal resistance R=ΔTHR = \frac{\Delta T}{H}
  2. R=281400=0.02 ∘C s/calR = \frac{28}{1400} = 0.02\ ^\circ\text{C s/cal}
  3. So the answer is (b).
Report a mistake
Q34MHT CET 2021 · 23 SEP · SHIFT 2Medium

Heat Conduction · Thermal conductivity & rate of heat flow

A cylindrical rod has temperatures 'T1T_1 ' and 'T2T_2' at its ends. The rate of flow of heat is 'Q1Q_1 ' cal s−1\text{s}^{-1}. If length and radius of the rod are doubled keeping temperature constant, then the rate of flow of heat 'Q2Q_2' will be

Show answer and solution

Answer: (d)

  1. Q=Kπr2ΔTL⇒Q∝r2LQ = \frac{K\pi r^2\Delta T}{L} \Rightarrow Q \propto \frac{r^2}{L}
  2. Q2Q1=(2)22=2\frac{Q_2}{Q_1} = \frac{(2)^2}{2} = 2
  3. So the answer is (d) Q2=2Q1Q_2 = 2Q_1.
Report a mistake
Q35MHT CET 2021 · 22 SEP · SHIFT 1Medium

Heat Conduction · Thermal conductivity & rate of heat flow

A cylindrical rod is having temperatures θ1\theta_1 and θ2\theta_2 at its ends. The rate of heat flow is 'QQ' J s−1\text{J s}^{-1}. All the linear dimensions of the rod are doubled by keeping the temperatures constant. What is the new rate of flow of heat?

Show answer and solution

Answer: (c)

  1. Q=Kπr2ΔθL⇒Q∝r2LQ = \frac{K\pi r^2\Delta\theta}{L} \Rightarrow Q \propto \frac{r^2}{L}
  2. Doubling rr and LL: factor 42=2\frac{4}{2} = 2
  3. New rate =2Q= 2Q, so the answer is (c).
Report a mistake
Q36MHT CET 2021 · 21 SEP · SHIFT 1Medium

Heat Conduction · Thermal conductivity & rate of heat flow

The temperature difference bewtween two sides of metal plate, 3 cm3\text{ cm} thick is 15∘C15^\circ\text{C}. Heat is transmitted through plate at the rate of 900 kcal900\text{ kcal} per minute per m2\text{m}^2 at steady state. The thermal conductivity of metal is

Show answer and solution

Answer: (c)

  1. Heat flux =90060=15 kcal s−1m−2= \frac{900}{60} = 15\ \text{kcal s}^{-1}\text{m}^{-2}
  2. K=(H/A) dΔT=15×0.0315K = \frac{(H/A)\,d}{\Delta T} = \frac{15 \times 0.03}{15}
  3. K=3×10−2 kcal m−1s−1 ∘C−1K = 3 \times 10^{-2}\ \text{kcal m}^{-1}\text{s}^{-1}\,{}^\circ\text{C}^{-1}, so the answer is (c).
Report a mistake
Q37MHT CET 2021 · 21 SEP · SHIFT 2Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two rods of same length and material are joined end to end. They transfer heat in 8 second. When they are joined in parallel they transfer same amount of heat in same conditions in time

Show answer and solution

Answer: (b)

  1. Each rod has resistance RR. Series: 2R2R; parallel: R2\frac{R}{2}.
  2. Time ∝\propto resistance, so the time drops by a factor of 4.
  3. t=84=2 st = \frac{8}{4} = 2\ \text{s}, so the answer is (b).
Report a mistake
Q38JEE Main 2021 · 17 MAR · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two identical metal wires of thermal conductivities K1 and K2 respectively are connected in series. The effective thermal conductivity of the combination is:

Show answer and solution

Answer: (a)

  1. Identical wires: same LL and AA. In series, resistances add: 2LKeqA=LK1A+LK2A\frac{2L}{K_{eq}A} = \frac{L}{K_1A} + \frac{L}{K_2A}
  2. 2Keq=1K1+1K2\frac{2}{K_{eq}} = \frac{1}{K_1} + \frac{1}{K_2}
  3. Keq=2K1K2K1+K2K_{eq} = \frac{2K_1K_2}{K_1+K_2}, so the answer is (a).
Report a mistake
Q39JEE Main 2021 · 26 FEB · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

The temperature θ\theta at the junction of two insulating sheets, having thermal resistances R1 and R2 as well as top and bottom temperatures θ\theta1 and θ\theta2 (as shown in figure) is given by:

Figure

Show answer and solution

Answer: (a)

  1. Same heat current through both sheets: θ2−θR2=θ−θ1R1\frac{\theta_2 - \theta}{R_2} = \frac{\theta - \theta_1}{R_1}
  2. θ2R1−θR1=θR2−θ1R2\theta_2R_1 - \theta R_1 = \theta R_2 - \theta_1R_2
  3. θ=θ1R2+θ2R1R1+R2\theta = \frac{\theta_1R_2 + \theta_2R_1}{R_1+R_2}, so the answer is (a).
Report a mistake
Q40JEE Main 2021 · 27 AUG · SHIFT 1Medium

Heat Conduction · Composite rods, slabs & junction temperature

A rod CD of thermal resistance 10.0 KW−1{}^{-1} is joined at the middle of an identical rod AB as shown in figure. The end A, B and D are maintained at 200∘^\circC, 100∘^\circC and 125∘^\circC respectively. The heat current in CD is P watt. The value of P is ..................

Figure

Numerical answer type. Work it out, then open the answer.

Show answer and solution

Answer: 2

  1. C is the middle of AB, so RAC=RCB=5R_{AC} = R_{CB} = 5 K/W and RCD=10R_{CD} = 10 K/W.
  2. Heat balance at C: 200−T5+100−T5+125−T10=0\dfrac{200-T}{5} + \dfrac{100-T}{5} + \dfrac{125-T}{10} = 0
  3. 400−2T+200−2T+125−T=0⇒T=145∘400 - 2T + 200 - 2T + 125 - T = 0 \Rightarrow T = 145^\circC
  4. P=145−12510=2P = \dfrac{145-125}{10} = 2 W
Report a mistake
Q41MHT CET 2021 · 20 SEP · SHIFT 2Difficult

Heat Conduction · Thermal conductivity & rate of heat flow

A conducting rod of length 1 m1\text{ m} has area of cross-section 10−3 m210^{-3}\text{ m}^2. One end is immersed in boiling water (100∘C)(100^\circ\text{C}) and the other end in Ice (0∘C)(0^\circ\text{C}). If coefficient of thermal conductivity of rod\text{rod} is 96 cal/s m∘C96\text{ cal/s m}^\circ\text{C} and latent heat for ice is 8×104 cal/kg8 \times 10^{4}\text{ cal/kg} then the amount of ice which will melt in one minute is

Show answer and solution

Answer: (b)

  1. Rate of heat flow H=KAΔTL=96×10−3×1001=9.6H = \dfrac{KA\Delta T}{L} = \dfrac{96\times10^{-3}\times100}{1} = 9.6 cal/s
  2. Heat in 60 s: Q=9.6×60=576Q = 9.6\times60 = 576 cal
  3. m=QLf=5768×104=7.2×10−3m = \dfrac{Q}{L_f} = \dfrac{576}{8\times10^{4}} = 7.2\times10^{-3} kg
  4. So the answer is (b) 7.2×10−37.2\times10^{-3} kg.
Report a mistake
Q42JEE Main 2021 · 31 AUG · SHIFT 2Difficult

Heat Conduction · Composite rods, slabs & junction temperature

Two thin metallic spherical shells of radii r1 and r2 (r1 < r2) are placed with their centres coinciding. A material of thermal conductivity K is filled in the space between the shells. The inner shell is maintained at temperature θ\theta1 and the outer shell at temperature θ2(θ\theta_2 (\theta1 < θ\theta2). The rate at which heat flows radially through the material is :-

Show answer and solution

Answer: (a)

  1. Thin spherical shell: H=K(4πr2)dθdrH = K(4\pi r^2)\dfrac{d\theta}{dr}, constant through all shells.
  2. Integrate from r1r_1 to r2r_2: H(1r1−1r2)=4πK(θ2−θ1)H\left(\dfrac{1}{r_1}-\dfrac{1}{r_2}\right) = 4\pi K(\theta_2-\theta_1)
  3. H=4πKr1r2(θ2−θ1)r2−r1H = \dfrac{4\pi K r_1 r_2(\theta_2-\theta_1)}{r_2-r_1}
  4. So the answer is (a).
Report a mistake
Q43JEE Main 2020 · 6 SEP · SHIFT 2Medium

Heat Conduction · Composite rods, slabs & junction temperature

Three rods of identical cross-section and lengths are made of three different materials of thermal conductivity K1, K2 and K3, respectively. They are joined together at their ends to make a long rod (see figure). One end of the long rod is maintained at 100oC and the other at 0oC (see figure). If the joints of the rod are at 70oC and 20oC in steady state and there is no loss of energy from the surface of the rod, the correct relationship between K1, K2 and K3 is:

Figure

Show answer and solution

Answer: (a)

  1. Same LL, AA and heat current: K1(100−70)=K2(70−20)=K3(20−0)K_1(100-70) = K_2(70-20) = K_3(20-0)
  2. 30K1=50K2=20K330K_1 = 50K_2 = 20K_3
  3. K1K3=2030=23\frac{K_1}{K_3} = \frac{20}{30} = \frac{2}{3}, so the answer is (a) K1:K3=2:3K_1:K_3 = 2:3.
Report a mistake
Q44JEE Main 2019 · 10 JAN · SHIFT 1Easy

Heat Conduction · Composite rods, slabs & junction temperature

A heat source at T = 103 K is connected to another heat reservoir at T = 102 K by a copper slab which is 1 m thick. Given that the thermal conductivity of copper is 0.1 WK–1m–1, the energy flux through it in the steady state is -

Show answer and solution

Answer: (d)

  1. Temperatures are 103 K10^3\ \text{K} and 102 K10^2\ \text{K}, so ΔT=900 K\Delta T = 900\ \text{K}.
  2. Energy flux HA=KΔTd=0.1×9001\frac{H}{A} = \frac{K\Delta T}{d} = \frac{0.1 \times 900}{1}
  3. =90 W m−2= 90\ \text{W m}^{-2}, so the answer is (d).
Report a mistake
Q45JEE Main 2019 · 9 APR · SHIFT 2Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two materials having coefficients of thermal conductivity '3K' and 'K' and thickness 'd' and '3d', respectively, are joined to form a slab as shown in the figure. The temperatures of the outer surfaces are 'θ\theta2' and 'θ\theta1' respectively, (θ\theta2 > θ\theta1). The temperature at the interface is :-

Figure

Show answer and solution

Answer: (a)

  1. R=LKAR = \frac{L}{KA}: R1=d3KAR_1 = \frac{d}{3KA}, R2=3dKAR_2 = \frac{3d}{KA}, ratio 1:91:9.
  2. The drop across the 3K3K layer is 110(θ2−θ1)\frac{1}{10}(\theta_2 - \theta_1).
  3. θ=θ2−θ2−θ110=θ110+9θ210\theta = \theta_2 - \frac{\theta_2-\theta_1}{10} = \frac{\theta_1}{10} + \frac{9\theta_2}{10}
  4. So the answer is (a).
Report a mistake
Q46NEET 2019Difficult

Heat Conduction · Thermal conductivity & rate of heat flow

A deep rectangular pond of surface area AA, containing water (density = ρ\rho), specific heat capacity = ss), is located in a region where the outside air temperature is at a steady value of −26∘C-26^\circ\text{C}. The thickness of the frozen ice layer in this pond, at a certain instant is xx.

Taking the thermal conductivity of ice as KK, and its specific latent heat of fusion as LL, the rate of increase of the thickness of ice layer, at this instant, would be given by

Show answer and solution

Answer: (d)

  1. Water below the ice is at 0∘0^\circC, top of ice at −26∘-26^\circC; heat conducted through the ice layer: KA(26)x\dfrac{KA(26)}{x}
  2. This heat comes from freezing a layer dxdx: ρA dx L=26KAxdt\rho A\,dx\,L = \dfrac{26KA}{x}dt
  3. dxdt=26KρxL\dfrac{dx}{dt} = \dfrac{26K}{\rho x L}
  4. So the answer is (d).
Report a mistake
Q47JEE Main 2019 · 9 JAN · SHIFT 1Difficult

Heat Conduction · Thermal conductivity & rate of heat flow

Temperature difference of 120oC is maintained between ends of a uniform rod AB of length 2L. Another bent rod PQ, of same cross-section as AB and length 3L2,\frac{3L}{2}, is connected across AB (see figure). In steady state, temperature difference between P and Q will be close to:

Figure

Show answer and solution

Answer: (a)

ABL/2L/2L3L/2PQ
  1. Same material and area, so resistance ∝\propto length. AP =QB=L/2= QB = L/2; between P and Q: straight part LL in parallel with bent rod 3L/23L/2.
  2. RPQ=L⋅3L2L+3L2=3L5R_{PQ} = \dfrac{L\cdot\frac{3L}{2}}{L+\frac{3L}{2}} = \dfrac{3L}{5} (in units of 1KA\frac{1}{KA})
  3. Total =L2+3L5+L2=8L5= \dfrac{L}{2} + \dfrac{3L}{5} + \dfrac{L}{2} = \dfrac{8L}{5}
  4. ΔTPQ=120×3/58/5=45∘\Delta T_{PQ} = 120\times\dfrac{3/5}{8/5} = 45^\circC
  5. So the answer is (a) 45∘45^\circC.
Report a mistake
Q48JEE Main 2019 · 12 JAN · SHIFT 1Difficult

Heat Conduction · Composite rods, slabs & junction temperature

A cylinder of radius R is surrounded by a cylindrical shell of inner radius R and outer radius 2R. The thermal conductivity of the material of the inner cylinder is K1 and the of the outer cylinder is K2. Assuming no loss of heat, the effective thermal conductivity of the system for heat flowing along the length of the cylinder is:

Show answer and solution

Answer: (b)

  1. Heat flows along the length: the two parts are in parallel, KeqAtotal=K1A1+K2A2K_{eq}A_{total} = K_1A_1 + K_2A_2
  2. A1=πR2A_1 = \pi R^2, A2=π(4R2−R2)=3πR2A_2 = \pi(4R^2 - R^2) = 3\pi R^2, Atotal=4πR2A_{total} = 4\pi R^2
  3. Keq(4πR2)=K1πR2+3K2πR2K_{eq}(4\pi R^2) = K_1\pi R^2 + 3K_2\pi R^2
  4. So the answer is (b) K1+3K24\dfrac{K_1+3K_2}{4}.
Report a mistake
Q49NEET 2017Medium

Heat Conduction · Composite rods, slabs & junction temperature

Two rods A and B of different materials are welded together as shown in figure. Their thermal conductivities are K1 and K2. The thermal conductivity of the composite will be

Figure

Show answer and solution

Answer: (d)

  1. The rods are side by side between T1T_1 and T2T_2, so they are in parallel; each has area AA, total 2A2A.
  2. K(2A)ΔTd=K1AΔTd+K2AΔTd\frac{K(2A)\Delta T}{d} = \frac{K_1A\Delta T}{d} + \frac{K_2A\Delta T}{d}
  3. K=K1+K22K = \frac{K_1+K_2}{2}, so the answer is (d).
Report a mistake
Q50JEE Main 2014Difficult

Heat Conduction · Composite rods, slabs & junction temperature

Three rods of Copper, Brass and Steel are welded together to form a YY shaped structure. Area of cross - section of each rod =4 cm2.= 4\text{ cm}^2. End of copper rod is maintained at 100∘C100^\circ\text{C} where as ends of brass and steel are kept at 0∘C0^\circ\text{C}. Lengths of the copper, brass and steel rods are 46, 1346,\ 13 and 12 cms12\text{ cms} respectively. The rods are thermally insulated from surroundings excepts at ends. Thermal conductivities of copper, brass and steel are 0.92, 0.260.92,\ 0.26 and 0.12 CGS0.12\text{ CGS} units respectively. Rate of heat flow through copper rod is:

Show answer and solution

Answer: (c)

  1. Let junction temperature be TT. Heat in through copper = heat out through brass + steel (same area).
  2. 0.92(100−T)46=0.26T13+0.12T12⇒0.02(100−T)=0.03T\dfrac{0.92(100-T)}{46} = \dfrac{0.26T}{13} + \dfrac{0.12T}{12} \Rightarrow 0.02(100-T) = 0.03T
  3. T=40∘T = 40^\circC
  4. HCu=0.92×4×6046=4.8H_{Cu} = \dfrac{0.92\times4\times60}{46} = 4.8 cal/s
  5. So the answer is (c) 4.8 cal/s.
Report a mistake
Q51JEE Main 2009 · AIEEEEasy

Heat Conduction · Thermal conductivity & rate of heat flow

A long metallic bar is carrying heat from one of its ends to the other end under steady-state. The variation of temperature θ\theta along the length xx of the bar from its hot end is best described by which of the following figures?

Show answer and solution

Answer: (a)

  1. In steady state with no side loss, H=−KAdθdxH = -KA\frac{d\theta}{dx} is the same at every section.
  2. So dθdx\frac{d\theta}{dx} is constant: θ\theta falls linearly with xx.
  3. So the answer is (a), a straight line sloping down.
Report a mistake
Q52JEE Main 2007 · AIEEEMedium

Heat Conduction · Composite rods, slabs & junction temperature

One end of a thermally insulated rod is kept at a temperature T1T_1 and the other at T2T_2. The rod is composed of two sections of length L1L_1 and L2L_2 and thermal conductivities K1K_1 and K2K_2 respectively. The temperature at the interface of the two section is

Figure

Show answer and solution

Answer: (d)

  1. Same heat current: K1A(T1−T)L1=K2A(T−T2)L2\frac{K_1A(T_1 - T)}{L_1} = \frac{K_2A(T - T_2)}{L_2}
  2. K1L2(T1−T)=K2L1(T−T2)K_1L_2(T_1 - T) = K_2L_1(T - T_2)
  3. T=K1L2T1+K2L1T2K1L2+K2L1T = \frac{K_1L_2T_1 + K_2L_1T_2}{K_1L_2 + K_2L_1}, so the answer is (d).
Report a mistake
Q53JEE Main 2005 · AIEEEMedium

Heat Conduction · Composite rods, slabs & junction temperature

The figure shows a system of two concentric spheres of radii r1r_1 and r2r_2 are kept at temperatures T1T_1 and T2T_2, respectively. The radial rate of flow of heat in a substance between the two concentric spheres is proportional to

Figure

Show answer and solution

Answer: (d)

  1. A thin shell of radius rr and thickness drdr: H=−K(4πr2)dTdrH = -K(4\pi r^2)\dfrac{dT}{dr}, same HH through every shell.
  2. H∫r1r2drr2=4πK(T1−T2)⇒H(1r1−1r2)=4πK(T1−T2)H\int_{r_1}^{r_2}\dfrac{dr}{r^2} = 4\pi K(T_1-T_2) \Rightarrow H\left(\dfrac{1}{r_1}-\dfrac{1}{r_2}\right) = 4\pi K(T_1-T_2)
  3. H=4πKr1r2(T1−T2)r2−r1H = \dfrac{4\pi K r_1 r_2 (T_1-T_2)}{r_2-r_1}
  4. So the answer is (d) H∝r1r2r2−r1H \propto \dfrac{r_1 r_2}{r_2-r_1}.
Report a mistake
Q54JEE Main 2004 · AIEEEMedium

Heat Conduction · Composite rods, slabs & junction temperature

The temperature of the two outer surfaces of a composite slab, consisting of two materials having coefficients of thermal conductivity KK and 2K2K and thickness xx and 4x,4x, respectively, are T2T_2 and T1 (T2>T1).T_1\ (T_2 > T_1). The rate of heat transfer through the slab, in a steady state is (A(T2−T1)Kx)f,\left(\frac{A(T_2-T_1)K}{x}\right) f, with ff equal to

Figure

Show answer and solution

Answer: (d)

  1. Slabs in series: thermal resistances add, R=xKA+4x2KA=3xKAR = \dfrac{x}{KA} + \dfrac{4x}{2KA} = \dfrac{3x}{KA}
  2. H=T2−T1R=A(T2−T1)Kx⋅13H = \dfrac{T_2-T_1}{R} = \dfrac{A(T_2-T_1)K}{x}\cdot\dfrac{1}{3}
  3. So the answer is (d) f=13f = \dfrac{1}{3}.
Report a mistake
Q55NEET 1995 · AIPMTMedium

Heat Conduction · Thermal conductivity & rate of heat flow

Heat is flowing through two cylindrical rods of the same material. The diameters of the rods are in the ratio 1:21 : 2 and the lengths in the ratio 2:12 : 1. If the temperature difference between the ends is same, then ratio of the rate of flow of heat through them will be

Show answer and solution

Answer: (d)

  1. H∝AL∝d2LH \propto \frac{A}{L} \propto \frac{d^2}{L} (same material and ΔT\Delta T).
  2. H1H2=(12)2×12=18\frac{H_1}{H_2} = \left(\frac{1}{2}\right)^2 \times \frac{1}{2} = \frac{1}{8}
  3. So the answer is (d) 1:81:8.
Report a mistake
Q56MHT CET 2026 · 13 MAY · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

If 150150 J of energy is incident on area 2 m22\text{ m}^2 and amount of heat reflected is 1515 J, coefficient of absorption is 0.60.6 the amount of energy transmitted is

Show answer and solution

Answer: (b)

  1. a+r+t=1a + r + t = 1; absorbed =0.6×150=90= 0.6\times150 = 90 J
  2. Transmitted =150−90−15=45= 150 - 90 - 15 = 45 J
  3. So the answer is (b) 45 J.
Report a mistake
Q57MHT CET 2026 · 13 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Heat energy is incident on the surface at the rate of 10001000 J/min. If coefficient of absorption is 0.80.8 and coefficient of reflection is 0.10.1 then heat energy transmitted by the surface in 5 minute is

Show answer and solution

Answer: (b)

  1. t=1−a−r=1−0.8−0.1=0.1t = 1 - a - r = 1 - 0.8 - 0.1 = 0.1
  2. Energy incident in 5 min =5000= 5000 J
  3. Transmitted =0.1×5000=500= 0.1\times5000 = 500 J
  4. So the answer is (b) 500 J.
Report a mistake
Q58MHT CET 2026 · 19 APR · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

When 170170 J of energy is incident on a surface of a body, 1717 J of energy is reflected by it. If the coefficient of absorption is 0.70.7, then the amount of energy transmitted will be

Show answer and solution

Answer: (c)

  1. r=17170=0.1r = \dfrac{17}{170} = 0.1, a=0.7a = 0.7, so t=1−0.7−0.1=0.2t = 1 - 0.7 - 0.1 = 0.2
  2. Transmitted =0.2×170=34= 0.2\times170 = 34 J
  3. So the answer is (c) 34.0 J.
Report a mistake
Q59MHT CET 2026 · 17 APR · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

'xx' joule of heat is incident on a body. Out of it, the total heat reflected and transmitted by it is 'yy' joule. The absorption coefficient of the body is

Show answer and solution

Answer: (b)

  1. Heat absorbed =x−y= x - y (rest is reflected or transmitted).
  2. a=absorbedincident=x−yxa = \dfrac{\text{absorbed}}{\text{incident}} = \dfrac{x-y}{x}
  3. So the answer is (b).
Report a mistake
Q60MHT CET 2026 · 19 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A perfectly black body radiates power at temperature T1T_1 K. If it is to radiate 16 times this power, its temperature should be increased by

Show answer and solution

Answer: (d)

  1. Stefan's law: P∝T4P \propto T^4
  2. T2T1=161/4=2⇒T2=2T1\dfrac{T_2}{T_1} = 16^{1/4} = 2 \Rightarrow T_2 = 2T_1
  3. Increase =2T1−T1=T1= 2T_1 - T_1 = T_1
  4. So the answer is (d) (T1)(T_1) K.
Report a mistake
Q61MHT CET 2026 · 15 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

The temperature of a black body is increased by 50%50\% then the percentage increase of radiation is nearly

Show answer and solution

Answer: (c)

  1. E∝T4E \propto T^4; T′=1.5TT' = 1.5T
  2. E′E=(1.5)4=5.06\dfrac{E'}{E} = (1.5)^4 = 5.06
  3. Increase =(5.06−1)×100≈406%≈400%= (5.06 - 1)\times100 \approx 406\% \approx 400\%
  4. So the answer is (c) 400%.
Report a mistake
Q62MHT CET 2026 · 19 APR · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A black body is at temperature 827∘827^\circC. The rate at which it emits energy is proportional to

Show answer and solution

Answer: (c)

  1. Stefan's law uses absolute temperature: T=827+273=1100T = 827 + 273 = 1100 K
  2. E∝T4=(1100)4E \propto T^4 = (1100)^4
  3. So the answer is (c).
Report a mistake
Q63MHT CET 2026 · 20 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Temperature of two stars are in the ratio 3:23 : 2. If wavelength of maximum intensity of first star is 42004200 Å, the corresponding wavelength for second star is

Show answer and solution

Answer: (c)

  1. Wien's law: λmT=\lambda_m T = constant, so λm∝1T\lambda_m \propto \dfrac{1}{T}
  2. λ2=λ1T1T2=4200×32=6300\lambda_2 = \lambda_1\dfrac{T_1}{T_2} = 4200\times\dfrac{3}{2} = 6300 Å
  3. So the answer is (c) 6300 Å.
Report a mistake
Q64MHT CET 2026 · 20 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Identify the INCORRECT statement about the black body radiation

Show answer and solution

Answer: (a)

  1. A black body emits all wavelengths, and its spectrum has a peak at λm\lambda_m (Wien's law), falling off at longer wavelengths.
  2. So intensity is not the same for all wavelengths.
  3. So the incorrect statement is (a).
Report a mistake
Q65MHT CET 2026 · 20 APR · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Two stars A and B radiate maximum energy at wavelength 3.9×10−73.9 \times 10^{-7} m and 5.2×10−75.2 \times 10^{-7} m respectively. The ratio of the temperature of star A to that of star B will be

Show answer and solution

Answer: (d)

  1. Wien's law: λmT=b\lambda_m T = b, so T∝1λmT \propto \dfrac{1}{\lambda_m}.
  2. TATB=λBλA=5.2×10−73.9×10−7=43\dfrac{T_A}{T_B} = \dfrac{\lambda_B}{\lambda_A} = \dfrac{5.2 \times 10^{-7}}{3.9 \times 10^{-7}} = \dfrac{4}{3}
  3. So the answer is (d) 4:34 : 3.
Report a mistake
Q66MHT CET 2026 · 19 APR · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Out of the following, which statement is NOT true about black body radiation?

Show answer and solution

Answer: (b)

  1. A black body emits all wavelengths, but the intensity varies with λ\lambda (the Planck curve has a peak at λm\lambda_m).
  2. Intensity is therefore not the same for all wavelengths.
  3. So the statement that is NOT true is (b).
Report a mistake
Q67MHT CET 2026 · 17 APR · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black body emits radiation of maximum intensity of wavelength 'λ\lambda' at temperature 'T' K. Its corresponding wavelength at temperature (2.5T)(2.5T) K will be

Show answer and solution

Answer: (b)

  1. Wien's law: λm∝1T\lambda_m \propto \dfrac{1}{T}.
  2. λ′=λT2.5T=λ2.5=2λ5\lambda' = \lambda \dfrac{T}{2.5T} = \dfrac{\lambda}{2.5} = \dfrac{2\lambda}{5}
  3. So the answer is (b) 2λ5\dfrac{2\lambda}{5}.
Report a mistake
Q68MHT CET 2026 · 15 APR · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

About black body radiation, which one of the following is a WRONG statement?

Show answer and solution

Answer: (a)

  1. A black body emits all wavelengths, but the power radiated is different at different wavelengths, with a peak at λm\lambda_m.
  2. So 'power radiated is same for all wavelengths' is false.
  3. So the wrong statement is (a).
Report a mistake
Q69MHT CET 2026 · 20 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Two bodies 'X' and 'Y' at temperatures T1T_1 K and T2T_2 K respectively have the same dimensions. Their emissivities e1e_1 and e2e_2 are in the ratio of 1:61 : 6. If their emissive powers are same, the relation between their temperatures is

Show answer and solution

Answer: (c)

  1. Emissive power E=eσT4E = e\sigma T^4; equal EE gives e1T14=e2T24e_1 T_1^4 = e_2 T_2^4.
  2. (T1T2)4=e2e1=6\left(\dfrac{T_1}{T_2}\right)^4 = \dfrac{e_2}{e_1} = 6
  3. T1T2=61/4\dfrac{T_1}{T_2} = 6^{1/4}
  4. So the answer is (c) 61/4:16^{1/4} : 1.
Report a mistake
Q70MHT CET 2026 · 13 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Rate of radiation by a black body is 'R' at temperature 'T'. Another body has same area but emissivity is 0.2 and temperature 3T. Its rate of radiation is

Show answer and solution

Answer: (c)

  1. Rate of radiation P=eσAT4P = e\sigma A T^4; for the black body R=σAT4R = \sigma A T^4.
  2. P′=0.2 σA(3T)4=0.2×81 σAT4P' = 0.2\,\sigma A (3T)^4 = 0.2 \times 81\,\sigma A T^4
  3. P′=16.2RP' = 16.2R
  4. So the answer is (c) 16.2R16.2R.
Report a mistake
Q71MHT CET 2026 · 11 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

A wire of length LL and diameter dd is used in a bulb. The temperature of wire is TT and power radiated by the wire is PP. Its emissivity is (σ\sigma = Stefan's constant) (Assume that emissivity of wire material is same at all wavelength)

Show answer and solution

Answer: (a)

  1. Radiating area of the wire (curved surface) A=πdLA = \pi d L.
  2. P=eσAT4=eσπdLT4P = e\sigma A T^4 = e\sigma \pi d L T^4
  3. e=PσT4πdLe = \dfrac{P}{\sigma T^4 \pi d L}
  4. So the answer is (a).
Report a mistake
Q72MHT CET 2026 · 14 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

At 273∘273^\circC, the emissive power of a perfectly black body is RR. The value at 0∘0^\circC is

Show answer and solution

Answer: (b)

  1. Stefan's law: E∝T4E \propto T^4 (T in kelvin).
  2. 273∘C=546273^\circ\text{C} = 546 K, 0∘C=2730^\circ\text{C} = 273 K
  3. E′R=(273546)4=116\dfrac{E'}{R} = \left(\dfrac{273}{546}\right)^4 = \dfrac{1}{16}
  4. So the answer is (b) R16\dfrac{R}{16}.
Report a mistake
Q73MHT CET 2026 · 13 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

The radiation emitted by a star A is 1000010000 times that of the sun. If surface temperature of sun and star A are 60006000 K and 20002000 K respectively, the ratio of radii of star A and sun is

Show answer and solution

Answer: (b)

  1. Power of a star P=4πr2σT4P = 4\pi r^2 \sigma T^4, so P∝r2T4P \propto r^2 T^4.
  2. PAPS=(rArS)2(20006000)4=10000\dfrac{P_A}{P_S} = \left(\dfrac{r_A}{r_S}\right)^2 \left(\dfrac{2000}{6000}\right)^4 = 10000
  3. (rArS)2=10000×81⇒rArS=900\left(\dfrac{r_A}{r_S}\right)^2 = 10000 \times 81 \Rightarrow \dfrac{r_A}{r_S} = 900
  4. So the answer is (b) 900:1900 : 1.
Report a mistake
Q74MHT CET 2026 · 13 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

The total radiant energy per unit area normal to the direction of incidence, received at a distance R from the centre of a star of radius r, whose outer surface radiates as a black body at a temperature 'T' K is (σ\sigma = Stefan's constant)

Show answer and solution

Answer: (a)

  1. Total power of the star P=4πr2σT4P = 4\pi r^2 \sigma T^4.
  2. At distance RR this spreads over a sphere of area 4πR24\pi R^2.
  3. Energy per unit area per unit time =4πr2σT44πR2=σr2T4R2= \dfrac{4\pi r^2 \sigma T^4}{4\pi R^2} = \dfrac{\sigma r^2 T^4}{R^2}
  4. So the answer is (a).
Report a mistake
Q75MHT CET 2026 · 20 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A sphere having temperature 600 K is losing heat due to radiation. At this temperature its rate of cooling is RR. The rate of cooling of this sphere at 400 K is x243\frac{x}{243}. The value of xx is (Temperature of surrounding is 300 K)

Show answer and solution

Answer: (d)

  1. Net rate of cooling ∝T4−T04\propto T^4 - T_0^4 with T0=300T_0 = 300 K.
  2. At 600 K: 6004−3004=15×3004=1215×1004600^4 - 300^4 = 15 \times 300^4 = 1215 \times 100^4
  3. At 400 K: 4004−3004=(256−81)×1004=175×1004400^4 - 300^4 = (256 - 81) \times 100^4 = 175 \times 100^4
  4. R′=R×1751215=35R243R' = R \times \dfrac{175}{1215} = \dfrac{35R}{243}
  5. So x=35Rx = 35R, answer (d).
Report a mistake
Q76MHT CET 2026 · 20 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A sphere is at temperature 600600 K. In an external environment of 200200 K, its cooling rate is R. When the temperature of the sphere falls to 400400 K then cooling rate R' will become

Show answer and solution

Answer: (d)

  1. Net rate of cooling ∝T4−T04\propto T^4 - T_0^4 with T0=200T_0 = 200 K.
  2. At 600 K: 6004−2004=(81−1)×2004=80×2004600^4 - 200^4 = (81 - 1) \times 200^4 = 80 \times 200^4
  3. At 400 K: 4004−2004=(16−1)×2004=15×2004400^4 - 200^4 = (16 - 1) \times 200^4 = 15 \times 200^4
  4. R′=1580R=316RR' = \dfrac{15}{80}R = \dfrac{3}{16}R
  5. So the answer is (d).
Report a mistake
Q77MHT CET 2026 · 18 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two spherical black bodies of radii R1R_1 and R2R_2 having surface temperature T1T_1 and T2T_2 respectively, radiate the same power. The ratio of R1R_1 to R2R_2 will be

Show answer and solution

Answer: (c)

  1. Power P=4πR2σT4P = 4\pi R^2 \sigma T^4; equal power gives R12T14=R22T24R_1^2 T_1^4 = R_2^2 T_2^4.
  2. R1R2=(T2T1)2\dfrac{R_1}{R_2} = \left(\dfrac{T_2}{T_1}\right)^2
  3. So the answer is (c).
Report a mistake
Q78MHT CET 2026 · 17 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

In an external environment of temperature (TT) kelvin, a sphere at temperature (3T3T) kelvin has cooling rate R1R_1. When the temperature of that sphere falls to (2T2T) kelvin, the cooling rate R2R_2 of the sphere will become

Show answer and solution

Answer: (d)

  1. Net rate of cooling ∝Ts4−T4\propto T_s^4 - T^4.
  2. At 3T3T: (81−1)T4=80T4(81 - 1)T^4 = 80T^4; at 2T2T: (16−1)T4=15T4(16 - 1)T^4 = 15T^4
  3. R2=1580R1=316R1R_2 = \dfrac{15}{80}R_1 = \dfrac{3}{16}R_1
  4. So the answer is (d).
Report a mistake
Q79MHT CET 2026 · 13 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

What will be the ratio of rate of radiation of metal sphere at two different temperatures T1=527∘T_1 = 527^\circC and T2=127∘T_2 = 127^\circC

Show answer and solution

Answer: (b)

  1. Stefan's law: rate of radiation ∝T4\propto T^4 (T in kelvin).
  2. T1=800T_1 = 800 K, T2=400T_2 = 400 K
  3. P1P2=(800400)4=16\dfrac{P_1}{P_2} = \left(\dfrac{800}{400}\right)^4 = 16
  4. So the answer is (b) 16:116 : 1.
Report a mistake
Q80MHT CET 2026 · 14 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

The wavelength of maximum intensity of radiation emitted by a star is 289.8289.8 nm. The radiation intensity of the star is (Stefan's constant = 5.67×10−85.67 \times 10^{-8} SI unit, Wein's constant 2898 μ2898\,\mumk)

Show answer and solution

Answer: (a)

  1. Wien's law: T=bλm=2898×10−6289.8×10−9=104 KT = \frac{b}{\lambda_m} = \frac{2898 \times 10^{-6}}{289.8 \times 10^{-9}} = 10^4\text{ K}
  2. Intensity =σT4=5.67×10−8×1016= \sigma T^4 = 5.67 \times 10^{-8} \times 10^{16}
  3. =5.67×108 W/m2= 5.67 \times 10^{8}\text{ W/m}^2, so the answer is (a).
Report a mistake
Q81MHT CET 2026 · 12 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A rectangular black body of temperature 27∘C27^\circ\text{C} has surface area 66 cm ×3\times 3 cm and rate of radiation EE. If its temperature is increased by 300∘C300^\circ\text{C} and its linear dimensions are reduced to (13)rd\left(\frac{1}{3}\right)^{rd} of their initial value then the rate of radiation is

Show answer and solution

Answer: (b)

  1. P=σAT4P = \sigma A T^4, so P∝AT4P \propto A T^4.
  2. T1=300 KT_1 = 300\text{ K}, T2=600 KT_2 = 600\text{ K}: factor 24=162^4 = 16.
  3. Linear dimensions become 13\frac{1}{3}, so area becomes 19\frac{1}{9}.
  4. P′=169EP' = \frac{16}{9}E, so the answer is (b).
Report a mistake
Q82MHT CET 2026 · 20 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black body is at temperature of 5780 K. The energy of radiation emitted by the body at wavelength 300 nm is U1U_1, at wavelength 500 nm is U2U_2 and that at 900 nm is U3U_3 respectively. Wien's constant b=2.89×106b = 2.89 \times 10^{6} nmK. This shows that

Show answer and solution

Answer: (c)

  1. Wien's law: λm=bT=2.89×1065780=500 nm\lambda_m = \frac{b}{T} = \frac{2.89 \times 10^6}{5780} = 500\text{ nm}.
  2. Energy is maximum at 500 nm and falls on either side.
  3. So U2U_2 is the largest: U1<U2>U3U_1 < U_2 > U_3, answer (c).
Report a mistake
Q83MHT CET 2026 · 16 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black rectangular surface of area 'A' emits energy 'E' per second at 27∘27^\circ C. If length and breadth is reduced to half of its initial value and temperature is raised to 327∘327^\circC then energy emitted per second becomes

Show answer and solution

Answer: (b)

  1. E∝AT4E \propto A T^4.
  2. Length and breadth halved: A→A4A \to \frac{A}{4}.
  3. T:300 K→600 KT: 300\text{ K} \to 600\text{ K}, factor 1616.
  4. E′=164E=4EE' = \frac{16}{4}E = 4E, so the answer is (b).
Report a mistake
Q84MHT CET 2026 · 15 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black rectangular surface of area A emits energy E per second at 127∘127^\circ C. If length and breadth is reduced to half of initial value and temperature is raised to 527∘527^\circ C then energy emitted becomes

Show answer and solution

Answer: (c)

  1. E∝AT4E \propto A T^4.
  2. Length and breadth halved: A→A4A \to \frac{A}{4}.
  3. T:400 K→800 KT: 400\text{ K} \to 800\text{ K}, factor 1616.
  4. E′=164E=4EE' = \frac{16}{4}E = 4E, so the answer is (c).
Report a mistake
Q85MHT CET 2026 · 13 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black rectangular surface of area A emits energy E per unit time at 27∘27^\circ C. If length and breadth is reduced to (14)th\left(\frac{1}{4}\right)^{th} of initial value and temperature is raised to 327∘327^\circ C, then energy emitted per unit time becomes

Show answer and solution

Answer: (a)

  1. E∝AT4E \propto A T^4.
  2. Length and breadth become 14\frac{1}{4}: A→A16A \to \frac{A}{16}.
  3. T:300 K→600 KT: 300\text{ K} \to 600\text{ K}, factor 1616.
  4. E′=1616E=EE' = \frac{16}{16}E = E, so the answer is (a).
Report a mistake
Q86MHT CET 2026 · 19 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The power radiated by a black body is PP and it radiates maximum energy at wavelength λ0\lambda_0. If the temperature of the black body is now changed so that it radiates maximum energy at wavelength 0.75λ00.75\lambda_0, the power radiated by it becomes nPnP. The value nn is

Show answer and solution

Answer: (b)

  1. Wien: T∝1λmT \propto \frac{1}{\lambda_m}, so T′T=λ00.75λ0=43\frac{T'}{T} = \frac{\lambda_0}{0.75\lambda_0} = \frac{4}{3}.
  2. Stefan: P∝T4⇒n=(43)4=25681P \propto T^4 \Rightarrow n = \left(\frac{4}{3}\right)^4 = \frac{256}{81}
  3. So the answer is (b) 25681\frac{256}{81}.
Report a mistake
Q87MHT CET 2026 · 14 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The power radiated by a black body is P and it radiates maximum energy at wavelength λ0\lambda_0. If the temperature of the black body is now changed so that it radiates maximum energy at wavelength 3λ04\frac{3\lambda_0}{4}, the power radiated by it becomes nP. The value of n is

Show answer and solution

Answer: (a)

  1. Wien: T∝1λmT \propto \frac{1}{\lambda_m}, so T′T=43\frac{T'}{T} = \frac{4}{3}.
  2. Stefan: P∝T4⇒n=(43)4=25681P \propto T^4 \Rightarrow n = \left(\frac{4}{3}\right)^4 = \frac{256}{81}
  3. So the answer is (a) 25681\frac{256}{81}.
Report a mistake
Q88MHT CET 2026 · 18 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

A black body radiates maximum energy at wavelength 'λ\lambda' at temperature T1T_1 and its emissive power is E. When the temperature of the body is changed to T2T_2, it radiates maximum energy at wavelength 2λ3\frac{2\lambda}{3}, then the emissive power will become

Show answer and solution

Answer: (b)

  1. Wien: T∝1λmT \propto \frac{1}{\lambda_m}, so T2T1=λ2λ/3=32\frac{T_2}{T_1} = \frac{\lambda}{2\lambda/3} = \frac{3}{2}.
  2. Stefan: E∝T4⇒E′=(32)4E=8116EE \propto T^4 \Rightarrow E' = \left(\frac{3}{2}\right)^4 E = \frac{81}{16}E
  3. So the answer is (b).
Report a mistake
Q89MHT CET 2026 · 16 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The energy spectrum of a black body exhibits a maximum around a wavelength 'λ\lambda'. The temperature of the black body is now changed such that the energy is maximum around a wavelength 2λ/32\lambda/3. The power radiated by the black body will now increase by a factor

Show answer and solution

Answer: (b)

  1. Wien: T∝1λmT \propto \frac{1}{\lambda_m}, so T′T=32\frac{T'}{T} = \frac{3}{2}.
  2. Stefan: P∝T4⇒P \propto T^4 \Rightarrow factor =(32)4=8116= \left(\frac{3}{2}\right)^4 = \frac{81}{16}
  3. So the answer is (b) 8116\frac{81}{16}.
Report a mistake
Q90MHT CET 2026 · 15 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The energy spectrum of a black body exhibits a maximum around a wavelength λ\lambda. The temperature of a black body is now changed such that the energy is maximum at wavelength 2λ/32\lambda/3. The power radiated by the black body will now increase by a factor of

Show answer and solution

Answer: (b)

  1. Wien: T∝1λmT \propto \frac{1}{\lambda_m}, so T′T=32\frac{T'}{T} = \frac{3}{2}.
  2. Stefan: P∝T4⇒P \propto T^4 \Rightarrow factor =(32)4=8116= \left(\frac{3}{2}\right)^4 = \frac{81}{16}
  3. So the answer is (b) 8116\frac{81}{16}.
Report a mistake
Q91MHT CET 2026 · 15 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

A black disc has a radius 'R' and wavelength corresponding to the maximum intensity is 'λ\lambda'. The emissive power (E) for the different radii and maximum wavelengths is directly proportional to

Show answer and solution

Answer: (b)

  1. Power from the disc: E=σAT4E = \sigma A T^4 with A∝R2A \propto R^2.
  2. Wien: T=bλ⇒T4∝λ−4T = \frac{b}{\lambda} \Rightarrow T^4 \propto \lambda^{-4}.
  3. E∝R2λ−4E \propto R^2 \lambda^{-4}, so the answer is (b).
Report a mistake
Q92MHT CET 2026 · 11 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The energy spectrum of a black body exhibits a maximum of wavelength λ0\lambda_0. The temperature of the black body is now changed such that the energy is maximum at wavelength 3λ02\frac{3\lambda_0}{2}. The ratio of power radiated by the black body will be

Show answer and solution

Answer: (b)

  1. Wien: T∝1λmT \propto \frac{1}{\lambda_m}, so T′T=λ03λ0/2=23\frac{T'}{T} = \frac{\lambda_0}{3\lambda_0/2} = \frac{2}{3}.
  2. Stefan: P′P=(23)4=1681\frac{P'}{P} = \left(\frac{2}{3}\right)^4 = \frac{16}{81}
  3. So the answer is (b) 1681\frac{16}{81}.
Report a mistake
Q93MHT CET 2026 · 12 MAY · SHIFT 1Difficult

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

Three spheres, P, Q and R, having radii 44 m, 55 m and 66 m respectively, are coated with lamp black on their outer surfaces. The wavelengths corresponding to maximum intensity (radiated) are 400400 nm, 500500 nm and 600600 nm respectively. If the powers radiated by them are PP,PQP_P, P_Q and PRP_R respectively, then PP:PQ:PRP_P : P_Q : P_R is

Show answer and solution

Answer: (b)

  1. P=σ(4πr2)T4P = \sigma (4\pi r^2) T^4 and T∝1λmT \propto \frac{1}{\lambda_m}, so P∝r2λm4P \propto \frac{r^2}{\lambda_m^4}.
  2. PP:PQ:PR=4244:5254:6264P_P : P_Q : P_R = \frac{4^2}{4^4} : \frac{5^2}{5^4} : \frac{6^2}{6^4}
  3. =116:125:136= \frac{1}{16} : \frac{1}{25} : \frac{1}{36}
  4. So the answer is (b).
Report a mistake
Q94MHT CET 2025 · 22 APR · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

If 120 J of thermal energy is incident on area 3 m23\text{ m}^{2}, the amount of heat transmitted is 12 J, coefficient of absorption is 0.6, then the amount of heat reflected is

Show answer and solution

Answer: (c)

  1. Absorbed =0.6×120=72= 0.6\times120 = 72 J
  2. Reflected =120−72−12=36= 120 - 72 - 12 = 36 J
  3. So the answer is (c) 36 J.
Report a mistake
Q95MHT CET 2025 · 20 APR · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

For a perfectly black body, coefficient of emission is

Show answer and solution

Answer: (b)

  1. A perfectly black body absorbs all radiation (a=1a = 1), and by Kirchhoff's law e=ae = a.
  2. So the answer is (b) unity.
Report a mistake
Q96MHT CET 2025 · 19 APR · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

The co-efficient of absorption and the coefficient of reflection of a thin uniform plate are 0.77 and 0.17 respectively. If 250 kcal of heat is incident on the surface of the plate, the quantity of heat transmitted is

Show answer and solution

Answer: (c)

  1. t=1−a−r=1−0.77−0.17=0.06t = 1 - a - r = 1 - 0.77 - 0.17 = 0.06
  2. Transmitted =0.06×250=15= 0.06\times250 = 15 kcal
  3. So the answer is (c) 15 kcal.
Report a mistake
Q97MHT CET 2025 · 19 APR · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Black sphere of radius R radiates power P at certain temperature TT. If the temperature is doubled, the radius gets doubled. Now the power radiated would be

Show answer and solution

Answer: (d)

  1. P=σ(4πR2)T4⇒P∝R2T4P = \sigma(4\pi R^2)T^4 \Rightarrow P \propto R^2T^4
  2. P′P=22×24=64\dfrac{P'}{P} = 2^2\times2^4 = 64
  3. So the answer is (d) 64 P.
Report a mistake
Q98MHT CET 2025 · 5 MAY · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black body has maximum wavelength ' λm\lambda_{m} ' at temperature 2000 K. Its maximum wavelength at 3000 K will be

Show answer and solution

Answer: (d)

  1. Wien's law: λmT=\lambda_m T = constant.
  2. λ′=λm×20003000=23λm\lambda' = \lambda_m \times \dfrac{2000}{3000} = \dfrac{2}{3}\lambda_m
  3. So the answer is (d) 23λm\dfrac{2}{3}\lambda_m.
Report a mistake
Q99MHT CET 2025 · 25 APR · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black body emits radiation of maximum intensity at wavelength ' λ\lambda ' at temperature T K. Its corresponding wavelength at temperature 1.5 T K will be

Show answer and solution

Answer: (a)

  1. Wien's law: λm∝1T\lambda_m \propto \dfrac{1}{T}.
  2. λ′=λT1.5T=2λ3\lambda' = \lambda \dfrac{T}{1.5T} = \dfrac{2\lambda}{3}
  3. So the answer is (a) 2λ3\dfrac{2\lambda}{3}.
Report a mistake
Q100MHT CET 2025 · 20 APR · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The following graph represents the radiant power versus wavelength of the black body. The area under the curve represents

Figure

Show answer and solution

Answer: (d)

  1. The y-axis is energy emitted per unit time per unit area per unit wavelength, EλE_\lambda.
  2. Area under the curve =∫Eλ dλ= \int E_\lambda\, d\lambda adds this over all wavelengths.
  3. This is the total energy emitted per unit time per unit area, E=σT4E = \sigma T^4.
  4. So the answer is (d).
Report a mistake
Q101MHT CET 2025 · 22 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Two bodies A and B at temperatures ' T1T_1 ' K and ' T2T_2 ' K respectively have the same dimensions. Their emissivities are in the ratio 16:116 : 1. At T1=xT2T_1 = xT_2, they radiate the same amount of heat per unit area per unit time. The value of xx is

Show answer and solution

Answer: (d)

  1. Same heat per unit area per unit time: e1T14=e2T24e_1 T_1^4 = e_2 T_2^4.
  2. (T1T2)4=e2e1=116\left(\dfrac{T_1}{T_2}\right)^4 = \dfrac{e_2}{e_1} = \dfrac{1}{16}
  3. T1T2=12⇒x=0.5\dfrac{T_1}{T_2} = \dfrac{1}{2} \Rightarrow x = 0.5
  4. So the answer is (d) 0.5.
Report a mistake
Q102JEE Main 2025 · 7 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

A wire of length 10 cm and diameter 0.5 mm is used in a bulb. The temperature of the wire is 1727∘C1727^\circ\text{C} and power radiated by the wire is 94.2 W. Its emissivity is x8\frac{x}{8} where x=x = _________. (Given σ=6.0×10−8 W m−2 K−4,π=3.14\sigma = 6.0 \times 10^{-8}\text{ W m}^{-2}\text{ K}^{-4}, \pi = 3.14 and assume that the emissivity of wire material is same at all wavelength.)

Numerical answer type. Work it out, then open the answer.

Show answer and solution

Answer: 5

  1. P=eσAT4P = e\sigma A T^4 with A=πdLA = \pi d L and T=1727+273=2000T = 1727 + 273 = 2000 K.
  2. A=3.14×0.5×10−3×0.1=1.57×10−4 m2A = 3.14 \times 0.5 \times 10^{-3} \times 0.1 = 1.57 \times 10^{-4}\ \text{m}^2
  3. σAT4=6×10−8×1.57×10−4×16×1012=150.72\sigma A T^4 = 6 \times 10^{-8} \times 1.57 \times 10^{-4} \times 16 \times 10^{12} = 150.72 W
  4. e=94.2150.72=0.625=58e = \dfrac{94.2}{150.72} = 0.625 = \dfrac{5}{8}
  5. So x=5x = 5.
Report a mistake
Q103MHT CET 2025 · 5 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

The outer surface of star in the form of a sphere radiates heat as a black body at temperature ' T '. The total radiant energy per unit area, normal to the direction of incidence, received at a distance ' RR ' from the centre of a star of radius ' rr ' is (R>r)(σ=(R > r)(\sigma = Stefan's constant ))

Show answer and solution

Answer: (a)

  1. Total power of the star P=4πr2σT4P = 4\pi r^2 \sigma T^4.
  2. At distance RR it spreads over area 4πR24\pi R^2.
  3. Energy per unit area per unit time =4πr2σT44πR2=σr2T4R2= \dfrac{4\pi r^2 \sigma T^4}{4\pi R^2} = \dfrac{\sigma r^2 T^4}{R^2}
  4. So the answer is (a).
Report a mistake
Q104MHT CET 2025 · 26 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two spherical black bodies have radii ' R1R_1 ' and ' R2R_2 '. Their surface temperatures are ' T1T_1 ' and ' T2T_2 '. If they radiate same power, then R2R1\frac{R_2}{R_1} is

Show answer and solution

Answer: (d)

  1. Power P=4πR2σT4P = 4\pi R^2 \sigma T^4; equal power gives R12T14=R22T24R_1^2 T_1^4 = R_2^2 T_2^4.
  2. R2R1=(T1T2)2\dfrac{R_2}{R_1} = \left(\dfrac{T_1}{T_2}\right)^2
  3. So the answer is (d).
Report a mistake
Q105MHT CET 2025 · 26 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A black sphere has radius RR whose rate of radiation is E at temperature T. If radius is made R / 2 and temperature 3T, the rate of radiation will be

Show answer and solution

Answer: (c)

  1. Rate of radiation E=4πR2σT4∝R2T4E = 4\pi R^2 \sigma T^4 \propto R^2 T^4.
  2. E′E=(12)2(3)4=814\dfrac{E'}{E} = \left(\dfrac{1}{2}\right)^2 (3)^4 = \dfrac{81}{4}
  3. So the answer is (c) 81E4\dfrac{81E}{4}.
Report a mistake
Q106MHT CET 2025 · 23 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two spherical black bodies have radii ' R1R_1 ' and ' R2R_2 '. Their surface temperatures are T1KT_1 K and T2KT_2 K respectively. If they radiate the same power, the ratio R1R2\frac{R_1}{R_2} is

Show answer and solution

Answer: (d)

  1. Power P=4πR2σT4P = 4\pi R^2 \sigma T^4; equal power gives R12T14=R22T24R_1^2 T_1^4 = R_2^2 T_2^4.
  2. R1R2=(T2T1)2\dfrac{R_1}{R_2} = \left(\dfrac{T_2}{T_1}\right)^2
  3. So the answer is (d).
Report a mistake
Q107MHT CET 2025 · 21 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

If a black body at 400 K surrounded by atmosphere at 300 K has rate of cooling ' R0R_0 ', the same body at 900 K, surrounded by same atmosphere, will have rate of cooling nearly

Show answer and solution

Answer: (c)

  1. Net rate of cooling ∝T4−T04\propto T^4 - T_0^4 with T0=300T_0 = 300 K.
  2. At 400 K: (256−81)×1004=175×1004(256 - 81) \times 100^4 = 175 \times 100^4
  3. At 900 K: (6561−81)×1004=6480×1004(6561 - 81) \times 100^4 = 6480 \times 100^4
  4. RR0=6480175≈37\dfrac{R}{R_0} = \dfrac{6480}{175} \approx 37, nearest option 36R036R_0
  5. So the answer is (c) 36R036R_0.
Report a mistake
Q108JEE Main 2025 · 22 JAN · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two spherical bodies of same materials having radii 0.2 m and 0.8 m are placed in same atmosphere. The temperature of the smaller body is 800 K and temperature of the bigger body is 400 K. If the energy radiated from the smaller body is E, the energy radiated from the bigger body is (assume, effect of the surrounding temperature to be negligible),

Show answer and solution

Answer: (c)

  1. P=σe(4πr2)T4⇒P∝r2T4P = \sigma e (4\pi r^2) T^4 \Rightarrow P \propto r^2 T^4 (same material, same ee).
  2. PbigPsmall=(0.80.2)2(400800)4=16×116=1\frac{P_{big}}{P_{small}} = \left(\frac{0.8}{0.2}\right)^2 \left(\frac{400}{800}\right)^4 = 16 \times \frac{1}{16} = 1
  3. So the answer is (c) EE.
Report a mistake
Q109MHT CET 2025 · 25 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A rectangular black body of temperature 127∘C127^\circ\text{C} has surface area 4 cm×2 cm4\text{ cm} \times 2\text{ cm} and rate of radiation is E. If its temperature is increased by 400∘C400^\circ\text{C} and surface area is reduced to half of the initial value then the rate of radiation is

Show answer and solution

Answer: (d)

  1. E∝AT4E \propto A T^4.
  2. T:400 K→800 KT: 400\text{ K} \to 800\text{ K}, factor 24=162^4 = 16.
  3. Area halved: factor 12\frac{1}{2}.
  4. E′=16×12E=8EE' = 16 \times \frac{1}{2}E = 8E, so the answer is (d).
Report a mistake
Q110MHT CET 2025 · 22 APR · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Black bodies A and B radiate maximum energy with wavelength difference 4 μm4\,\mu\text{m}. The absolute temperature of body A is 3 times that of B. The wavelength at which body BB radiates maximum energy is

Show answer and solution

Answer: (b)

  1. Wien's law: λmT=b\lambda_m T = b, so λA=λB3\lambda_A = \frac{\lambda_B}{3} since TA=3TBT_A = 3T_B.
  2. λB−λB3=4 μm⇒23λB=4 μm\lambda_B - \frac{\lambda_B}{3} = 4\,\mu\text{m} \Rightarrow \frac{2}{3}\lambda_B = 4\,\mu\text{m}
  3. λB=6 μm\lambda_B = 6\,\mu\text{m}, so the answer is (b).
Report a mistake
Q111MHT CET 2025 · 21 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A rectangular block of surface area A emits energy E per second at 27∘C27^\circ\text{C}. If length and breadth is reduced to half of initial value and temperature is raised to 327∘C327^\circ\text{C} then energy emitted per second becomes

Show answer and solution

Answer: (b)

  1. E∝AT4E \propto A T^4.
  2. Length and breadth halved: A→A4A \to \frac{A}{4}.
  3. T:300 K→600 KT: 300\text{ K} \to 600\text{ K}, factor 1616.
  4. E′=164E=4EE' = \frac{16}{4}E = 4E, so the answer is (b).
Report a mistake
Q112MHT CET 2025 · 26 APR · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

Two black spheres P & QP \,\&\, Q have radii in the ratio 4:34 : 3. The wavelength of maximum intensity of radiation are in the ratio 4:54 : 5 respectively. The ratio of radiated power by P to Q is

Show answer and solution

Answer: (a)

  1. P∝r2T4P \propto r^2 T^4 and Wien gives T∝1λmT \propto \frac{1}{\lambda_m}, so P∝r2λm4P \propto \frac{r^2}{\lambda_m^4}.
  2. PPPQ=(43)2(54)4=169×625256\frac{P_P}{P_Q} = \left(\frac{4}{3}\right)^2 \left(\frac{5}{4}\right)^4 = \frac{16}{9} \times \frac{625}{256}
  3. =625144= \frac{625}{144}, so the answer is (a).
Report a mistake
Q113MHT CET 2024 · 9 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Three identical metal spheres (of same surface area) have red, black and white colors and they are heated up to same temperature. They are allowed to cool. Arrange them from maximum rate of cooling to minimum rate of cooling

Show answer and solution

Answer: (a)

  1. Good absorbers are good emitters: emissivity order black > red > white.
  2. Same area and temperature, so rate of cooling ∝e\propto e.
  3. So the answer is (a) black, red, white.
Report a mistake
Q114MHT CET 2024 · 3 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Given that ' xx ' joule of heat is incident on a body. Out of that, total heat reflected and transmitted is ' yy ' joule. The absorption coefficient of body is

Show answer and solution

Answer: (c)

  1. Absorbed heat =x−y= x - y
  2. a=x−yxa = \dfrac{x-y}{x}
  3. So the answer is (c).
Report a mistake
Q115MHT CET 2024 · 11 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Two spheres S1S_1 and S2S_2 have same radii but temperatures T1T_1 and T2T_2 respectively. Their emissive power is same and emissivity in the ratio 1:4. Then the ratio T1:T2T_1 : T_2 is

Show answer and solution

Answer: (b)

  1. Same emissive power: e1T14=e2T24e_1 T_1^4 = e_2 T_2^4.
  2. (T1T2)4=e2e1=4\left(\dfrac{T_1}{T_2}\right)^4 = \dfrac{e_2}{e_1} = 4
  3. T1T2=41/4=2\dfrac{T_1}{T_2} = 4^{1/4} = \sqrt{2}
  4. So the answer is (b) 2:1\sqrt{2} : 1.
Report a mistake
Q116MHT CET 2024 · 10 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Rate of radiation by a black body is ' R ' at temperature 'T'. Another body has same area but emissivity is 0.2 and temperature 3T. Its rate of radiation is

Show answer and solution

Answer: (c)

  1. Rate of radiation P=eσAT4P = e\sigma A T^4; for the black body R=σAT4R = \sigma A T^4.
  2. P′=0.2 σA(3T)4=0.2×81RP' = 0.2\,\sigma A (3T)^4 = 0.2 \times 81 R
  3. P′=16.2RP' = 16.2R
  4. So the answer is (c) (16.2)R(16.2)R.
Report a mistake
Q117MHT CET 2024 · 10 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A black sphere has radius RR whose rate of radiation is E at temperature T. If radius is made half and temperature 4 T, the rate of radiation will be

Show answer and solution

Answer: (a)

  1. Rate of radiation E∝R2T4E \propto R^2 T^4.
  2. E′E=(12)2(4)4=2564=64\dfrac{E'}{E} = \left(\dfrac{1}{2}\right)^2 (4)^4 = \dfrac{256}{4} = 64
  3. So the answer is (a) 64E64E.
Report a mistake
Q118MHT CET 2024 · 4 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two bodies ' X ' and ' Y ' at temperatures ' T1T_1 ' K and ' T2T_2 ' K respectively have the same dimensions. If their emissive powers are same, the relation between their temperatures is

Show answer and solution

Answer: (a)

  1. Emissive power E=eσT4E = e\sigma T^4; equal EE gives e1T14=e2T24e_1 T_1^4 = e_2 T_2^4.
  2. The emissivity ratio is missing in the question; in the original version e1:e2=1:3e_1 : e_2 = 1 : 3.
  3. (T1T2)4=e2e1=3⇒T1T2=31/4\left(\dfrac{T_1}{T_2}\right)^4 = \dfrac{e_2}{e_1} = 3 \Rightarrow \dfrac{T_1}{T_2} = 3^{1/4}
  4. So the answer works out to (c) 31/4:13^{1/4} : 1.
Report a mistake
Q119MHT CET 2024 · 4 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A sphere is at temperature 600 K. In an external environment of 200 K, its cooling rate is ' RR ' When the temperature of the sphere falls to 400 K, then cooling rate ' R′R' ' will become

Show answer and solution

Answer: (a)

  1. Net rate of cooling ∝T4−T04\propto T^4 - T_0^4 with T0=200T_0 = 200 K.
  2. At 600 K: (81−1)×2004=80×2004(81 - 1) \times 200^4 = 80 \times 200^4
  3. At 400 K: (16−1)×2004=15×2004(16 - 1) \times 200^4 = 15 \times 200^4
  4. R′=1580R=316RR' = \dfrac{15}{80}R = \dfrac{3}{16}R
  5. So the answer is (a).
Report a mistake
Q120MHT CET 2024 · 3 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two spherical black bodies of radii ' R1R_1 ' and ' R2R_2 ' and with surface temperature ' T1T_1 ' and ' T2T_2 ' respectively radiate the same power. The ratio of ' R1R_1 ' to ' R2R_2 ' will be

Show answer and solution

Answer: (b)

  1. Power P=4πR2σT4P = 4\pi R^2 \sigma T^4; equal power gives R12T14=R22T24R_1^2 T_1^4 = R_2^2 T_2^4.
  2. R1R2=(T2T1)2\dfrac{R_1}{R_2} = \left(\dfrac{T_2}{T_1}\right)^2
  3. So the answer is (b).
Report a mistake
Q121MHT CET 2024 · 10 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Ordinary bodies P and Q radiate maximum energy with wavelength difference 3 μm3\,\mu\text{m}. The absolute temperature of body P is four times that of Q. The wavelength at which body Q radiates maximum energy is

Show answer and solution

Answer: (b)

  1. Wien's law: λm∝1T\lambda_m \propto \frac{1}{T}, so λP=λQ4\lambda_P = \frac{\lambda_Q}{4}.
  2. λQ−λQ4=3 μm⇒34λQ=3 μm\lambda_Q - \frac{\lambda_Q}{4} = 3\,\mu\text{m} \Rightarrow \frac{3}{4}\lambda_Q = 3\,\mu\text{m}
  3. λQ=4 μm\lambda_Q = 4\,\mu\text{m}, so the answer is (b).
Report a mistake
Q122MHT CET 2024 · 2 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

The frequency ' νm\nu_{\text{m}} ' corresponding to which the energy emitted by a black body is maximum may vary with the temperature ' TT ' of the body as shown by the curves ' A ', ' B ', ' C ' and ' D ' in the figure. Which one of these represents the correct variation?

Figure

Show answer and solution

Answer: (c)

  1. Wien's law: λmT=b\lambda_m T = b and νm=cλm\nu_m = \frac{c}{\lambda_m}.
  2. νm=cbT⇒νm∝T\nu_m = \frac{c}{b}T \Rightarrow \nu_m \propto T
  3. The graph of νm\nu_m against TT is a straight line through the origin.
  4. So the answer is (c) straight line B.
Report a mistake
Q123MHT CET 2024 · 16 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The power radiated by a black body is P and it radiates maximum energy around the wavelength λ0\lambda_0. Now the temperature of the black body is changed so that it radiates maximum energy around wavelength (λ02)\left(\frac{\lambda_0}{2}\right). The power radiated by it will now increase by a factor of

Show answer and solution

Answer: (c)

  1. Wien: λm→λ02\lambda_m \to \frac{\lambda_0}{2} means T→2TT \to 2T.
  2. Stefan: P∝T4⇒P \propto T^4 \Rightarrow factor 24=162^4 = 16.
  3. So the answer is (c) 16.
Report a mistake
Q124MHT CET 2024 · 10 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The black discs x,yx, y and z have radii 1 m,2 m1\text{ m}, 2\text{ m} and 3 m respectively. The wavelengths corresponding to maximum intensity are 200 nm,300 nm200\text{ nm}, 300\text{ nm} and 400 nm respectively. The relation between emissive power Ex,EyE_x, E_y and EzE_z is

Show answer and solution

Answer: (a)

  1. Power E∝R2T4∝R2λm4E \propto R^2 T^4 \propto \frac{R^2}{\lambda_m^4}.
  2. Taking λ\lambda in units of 100 nm: Ex∝124=0.0625E_x \propto \frac{1}{2^4} = 0.0625, Ey∝434=0.049E_y \propto \frac{4}{3^4} = 0.049, Ez∝944=0.035E_z \propto \frac{9}{4^4} = 0.035.
  3. So Ex>Ey>EzE_x > E_y > E_z, answer (a).
Report a mistake
Q125MHT CET 2024 · 9 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

A black body radiates power ' P ' and maximum energy is radiated by it at a wavelength λ0\lambda_0. The temperature of the black body is now so changed that it radiates maximum energy at the wavelength λ04\frac{\lambda_0}{4}. The power radiated by it at new temperature is

Show answer and solution

Answer: (b)

  1. Wien: λm→λ04\lambda_m \to \frac{\lambda_0}{4} means T→4TT \to 4T.
  2. Stefan: P∝T4⇒P′=44P=256PP \propto T^4 \Rightarrow P' = 4^4 P = 256P
  3. So the answer is (b) 256P256P.
Report a mistake
Q126MHT CET 2023 · 14 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

A body is said to be opaque to the radiation if (a, r and t are coefficient of absorption, reflection and transmission respectively)

Show answer and solution

Answer: (a)

  1. Opaque body transmits nothing: t=0t = 0.
  2. From a+r+t=1a + r + t = 1: a+r=1a + r = 1
  3. So the answer is (a).
Report a mistake
Q127MHT CET 2023 · 10 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Heat energy is incident on the surface at the rate of X J/min. If 'aa' and 'rr' represent coefficient of absorption and reflection respectively then the heat energy transmitted by the surface in 'tt' minutes is

Show answer and solution

Answer: (a)

  1. a+r+t=1⇒t=1−(a+r)a + r + t = 1 \Rightarrow t = 1 - (a+r)
  2. Energy incident in tt minutes =Xt= Xt
  3. Transmitted =[1−(a+r)]Xt= [1-(a+r)]Xt
  4. None of the options matches exactly; (a) (a+r)Xt(a+r)Xt is the energy absorbed plus reflected, not transmitted.
Report a mistake
Q128MHT CET 2023 · 11 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

If the temperature of a hot body is increased by 50%50\%, then the increase in the quantity of emitted heat radiation will be approximately

Show answer and solution

Answer: (d)

  1. E∝T4E \propto T^4; E′E=(1.5)4≈5.06\dfrac{E'}{E} = (1.5)^4 \approx 5.06
  2. Increase ≈406%≈400%\approx 406\% \approx 400\%
  3. So the answer is (d) 400%.
Report a mistake
Q129MHT CET 2023 · 12 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

About black body radiation, which of the following is the wrong statement?

Show answer and solution

Answer: (a)

  1. A black body emits all wavelengths, but with different intensities; the curve rises to a peak at λm\lambda_m and falls on either side.
  2. So intensity is not the same for all wavelengths.
  3. So the wrong statement is (a).
Report a mistake
Q130MHT CET 2023 · 11 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

Two bodies AA and BB at temperatures 'T1T_1' K\text{K} and 'T2T_2' K\text{K} respectively have the same dimensions. Their emissivities are in the ratio 1:31 : 3. If they radiate the same amount of heat per unit area per unit time, then the ratio of their temperatures (T1:T2)(T_1 : T_2) is

Show answer and solution

Answer: (b)

  1. Same heat per unit area per unit time: e1T14=e2T24e_1 T_1^4 = e_2 T_2^4.
  2. (T1T2)4=e2e1=3\left(\dfrac{T_1}{T_2}\right)^4 = \dfrac{e_2}{e_1} = 3
  3. T1T2=31/4\dfrac{T_1}{T_2} = 3^{1/4}
  4. So the answer is (b) 31/4:13^{1/4} : 1.
Report a mistake
Q131MHT CET 2023 · 14 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A sphere and a cube, both of copper have equal volumes and are black. They are allowed to cool at same temperature and in same atmosphere. The ratio of their rate of loss of heat will be

Show answer and solution

Answer: (c)

  1. Same material, same temperature and surroundings, so rate of heat loss ∝\propto surface area AA.
  2. Equal volumes: 43πr3=a3\frac{4}{3}\pi r^3 = a^3, so a=(4π3)1/3ra = \left(\frac{4\pi}{3}\right)^{1/3} r.
  3. AsAc=4πr26a2=2π/3(4π/3)2/3\frac{A_s}{A_c} = \frac{4\pi r^2}{6a^2} = \frac{2\pi/3}{(4\pi/3)^{2/3}}
  4. Cubing: (AsAc)3=8π3/2716π2/9=π6\left(\frac{A_s}{A_c}\right)^3 = \frac{8\pi^3/27}{16\pi^2/9} = \frac{\pi}{6}
  5. So the answer is (c) (π6)1/3\left(\frac{\pi}{6}\right)^{1/3}.
Report a mistake
Q132MHT CET 2023 · 14 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A sphere, a cube and a thin circular plate all made of same material and having the same mass are heated to same temperature of 200∘C200^\circ\text{C}. When these are left in a room.

Show answer and solution

Answer: (c)

  1. Same mass and material, so same heat capacity mcmc; rate of cooling dTdt∝Amc\frac{dT}{dt} \propto \frac{A}{mc}.
  2. For a given volume, the sphere has the least surface area and a thin plate has the largest.
  3. Largest area means fastest heat loss, so the plate cools fastest.
  4. So the answer is (c) the circular plate reaches room temperature fast.
Report a mistake
Q133MHT CET 2023 · 13 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A black body at temperature 127∘C127^\circ\text{C} radiates heat at the rate of 5 cal/cm2 s5\text{ cal/cm}^{2}\text{ s}. At a temperature 927∘C927^\circ\text{C}, its rate of emission in units of cal/cm2 s\text{cal/cm}^{2}\text{ s} will be

Show answer and solution

Answer: (a)

  1. Stefan's law: E∝T4E \propto T^4 (T in kelvin).
  2. T1=400 KT_1 = 400\text{ K}, T2=1200 KT_2 = 1200\text{ K}, so E2E1=34=81\frac{E_2}{E_1} = 3^4 = 81.
  3. E2=81×5=405 cal/cm2 sE_2 = 81 \times 5 = 405\text{ cal/cm}^2\text{ s}
  4. So the answer is (a) 405.
Report a mistake
Q134MHT CET 2023 · 12 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Compare the rate of loss of heat from a metal sphere at 627∘C627^\circ\text{C} with the rate of loss of heat from the same sphere at 327∘C327^\circ\text{C}, if the temperature of the surrounding is 27∘C27^\circ\text{C}. (nearly)

Show answer and solution

Answer: (b)

  1. Net rate of heat loss ∝T4−T04\propto T^4 - T_0^4, with T0=300 KT_0 = 300\text{ K}.
  2. T1=900 K=3T0T_1 = 900\text{ K} = 3T_0, T2=600 K=2T0T_2 = 600\text{ K} = 2T_0.
  3. Q1Q2=34−124−1=8015≈5.3\frac{Q_1}{Q_2} = \frac{3^4 - 1}{2^4 - 1} = \frac{80}{15} \approx 5.3
  4. So the answer is (b) 5.3.
Report a mistake
Q135MHT CET 2023 · 12 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A black sphere has radius 'RR' whose rate of radiation is 'EE' at temperature 'TT'. If radius is made R/3R/3 and temperature '3T3T', the rate of radiation will be

Show answer and solution

Answer: (d)

  1. Radiated power P=σ(4πR2)T4P = \sigma (4\pi R^2) T^4, so P∝R2T4P \propto R^2 T^4.
  2. P′E=(13)2(3)4=819=9\frac{P'}{E} = \left(\frac{1}{3}\right)^2 (3)^4 = \frac{81}{9} = 9
  3. So the answer is (d) 9E9E.
Report a mistake
Q136MHT CET 2023 · 11 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two spherical black bodies of radii 'r1r_1' and 'r2r_2 ' at temperature 'T1T_1 ' and 'T2T_2' respectively radiate power in the ratio 1:21 : 2 Then r1:r2r_1 : r_2 is

Show answer and solution

Answer: (b)

  1. P∝r2T4P \propto r^2 T^4, so P1P2=r12T14r22T24=12\frac{P_1}{P_2} = \frac{r_1^2 T_1^4}{r_2^2 T_2^4} = \frac{1}{2}.
  2. (r1r2)2=12(T2T1)4\left(\frac{r_1}{r_2}\right)^2 = \frac{1}{2}\left(\frac{T_2}{T_1}\right)^4
  3. r1r2=12(T2T1)2\frac{r_1}{r_2} = \frac{1}{\sqrt{2}}\left(\frac{T_2}{T_1}\right)^2
  4. So the answer is (b).
Report a mistake
Q137MHT CET 2023 · 12 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

A black body radiates maximum energy at wavelength 'λ\lambda' and its emissive power is 'EE'. Now due to a change in temperature of that body, it radiates maximum energy at wavelength λ3\frac{\lambda}{3}. At that temperature emissive power is

Show answer and solution

Answer: (c)

  1. Wien: λm→λ3\lambda_m \to \frac{\lambda}{3} means T→3TT \to 3T.
  2. Stefan: E∝T4⇒E′=34E=81EE \propto T^4 \Rightarrow E' = 3^4 E = 81E
  3. Ratio new : old =81:1= 81 : 1, so the answer is (c).
Report a mistake
Q138MHT CET 2023 · 10 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

A black body radiates maximum energy at wavelength 'λ\lambda' and its emissive power is 'E' Now due to change in temperature of that body, it radiates maximum energy at wavelength 2λ3\frac{2\lambda}{3}. At that temperature emissive power is

Show answer and solution

Answer: (a)

  1. Wien: λm→2λ3\lambda_m \to \frac{2\lambda}{3} means T→32TT \to \frac{3}{2}T.
  2. Stefan: E∝T4⇒E′=(32)4E=8116EE \propto T^4 \Rightarrow E' = \left(\frac{3}{2}\right)^4 E = \frac{81}{16}E
  3. So the answer is (a) 8116\frac{81}{16} (times EE).
Report a mistake
Q139MHT CET 2023 · 10 MAY · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

A black body radiates maximum energy at wavelength 'λ\lambda' and its emissive power is EE. Now due to change in temperature of that body, it radiates maximum energy at wavelength 2λ3\frac{2\lambda}{3}. At that temperature emissive power is

Show answer and solution

Answer: (b)

  1. Wien's law: λmT=b\lambda_m T = b, so T∝1λmT \propto \frac{1}{\lambda_m}.
  2. λm′=2λ3⇒T′=32T\lambda_m' = \frac{2\lambda}{3} \Rightarrow T' = \frac{3}{2}T
  3. Stefan's law: E∝T4⇒E′=(32)4E=8116EE \propto T^4 \Rightarrow E' = \left(\frac{3}{2}\right)^4 E = \frac{81}{16}E
  4. So the answer is (b) 81E16\frac{81E}{16}.
Report a mistake
Q140MHT CET 2022 · 11 AUG · SHIFT 2Difficult

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

Three discs x,yx, y and zz having radii 2 m,3 m2\text{ m}, 3\text{ m} and 6 m6\text{ m} respectively are coated on outer surfaces. The wavelength corresponding to maximum intensity are 300 nm,400 nm300\text{ nm}, 400\text{ nm} and 500 nm500\text{ nm} respectively. If Px,PyP_x, P_y and PzP_z are power radiated by them respectively then

Show answer and solution

Answer: (b)

  1. P=σAT4P = \sigma A T^4 with A∝r2A \propto r^2 and T∝1λmT \propto \frac{1}{\lambda_m}, so P∝r2λm4P \propto \frac{r^2}{\lambda_m^4}.
  2. Px∝2234=481≈0.049P_x \propto \frac{2^2}{3^4} = \frac{4}{81} \approx 0.049
  3. Py∝3244=9256≈0.035P_y \propto \frac{3^2}{4^4} = \frac{9}{256} \approx 0.035, Pz∝6254=36625≈0.058P_z \propto \frac{6^2}{5^4} = \frac{36}{625} \approx 0.058
  4. So the answer is (b) PzP_z is maximum.
Report a mistake
Q141MHT CET 2021 · 23 SEP · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Absorptivity, reflectivity & emissivity

For a perfectly black body, coefficient of emission is

Show answer and solution

Answer: (c)

  1. A perfectly black body has a=1a = 1; by Kirchhoff's law its emissivity e=a=1e = a = 1.
  2. So the answer is (c) unity.
Report a mistake
Q142MHT CET 2021 · 23 SEP · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

The temperature of a black body is increased by 50%50\%, then the percentage increase in the rate of radiation by the body is approximated

Show answer and solution

Answer: (c)

  1. E∝T4E \propto T^4; E′E=(1.5)4≈5.06\dfrac{E'}{E} = (1.5)^4 \approx 5.06
  2. Increase ≈406%≈400%\approx 406\% \approx 400\%
  3. So the answer is (c) 400%.
Report a mistake
Q143MHT CET 2021 · 22 SEP · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

The emissive power of sphere of area 0.04 m20.04\text{ m}^{2} is 0.7 k cal s−1 m−20.7\text{ k cal s}^{-1}\text{ m}^{-2}. The amount of heat radiated in 20 second is

Show answer and solution

Answer: (d)

  1. Heat radiated Q=E×A×tQ = E\times A\times t
  2. Q=0.7×0.04×20=0.56Q = 0.7\times0.04\times20 = 0.56 kcal
  3. So the answer is (d) 0.56 (the unit should be kcal; the unit printed in the options is wrong).
Report a mistake
Q144MHT CET 2021 · 20 SEP · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A perfectly black body emits a radiation at temperature 'T 1_{1}' K. If it is to radiate at 16 times this power, its temperature 'T2_{2}' K should be

Show answer and solution

Answer: (c)

  1. P∝T4P \propto T^4; P2P1=16\dfrac{P_2}{P_1} = 16
  2. T2T1=161/4=2\dfrac{T_2}{T_1} = 16^{1/4} = 2
  3. So the answer is (c) 2T12T_1.
Report a mistake
Q145MHT CET 2021 · 24 SEP · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Assume that for solar radiation, surface temperature of the sun is 6000 K6000\text{ K}. If Wien's constant 'b' is 2.897×10−3 mK2.897 \times 10^{-3}\text{ mK}, the value of maximum wavelength will be

Show answer and solution

Answer: (a)

  1. Wien's law: λm=bT\lambda_m = \dfrac{b}{T}.
  2. λm=2.897×10−36000=4.828×10−7 m\lambda_m = \dfrac{2.897 \times 10^{-3}}{6000} = 4.828 \times 10^{-7}\ \text{m}
  3. =4828 A˚= 4828\ \mathring{A}
  4. So the answer is (a) 4828 A˚4828\ \mathring{A}.
Report a mistake
Q146MHT CET 2021 · 21 SEP · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black body has maximum wavelength 'λm\lambda_{m}' at temperature 2000 K2000\text{ K}. Its corresponding wavelength at temperature 3000 K3000\text{ K} will be

Show answer and solution

Answer: (b)

  1. Wien's law: λmT=\lambda_m T = constant.
  2. λ′=λm×20003000=2λm3\lambda' = \lambda_m \times \dfrac{2000}{3000} = \dfrac{2\lambda_m}{3}
  3. So the answer is (b) 2λm3\dfrac{2\lambda_m}{3}.
Report a mistake
Q147MHT CET 2021 · 20 SEP · SHIFT 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Two stars 'P' and 'Q' emit yellow and blue light respectively. The relation between their temperatures (TP(T_{P} and TQ)T_{Q}) is

Show answer and solution

Answer: (d)

  1. Wien's law: T∝1λmT \propto \dfrac{1}{\lambda_m}.
  2. Yellow light has a longer wavelength than blue, so λP>λQ\lambda_P > \lambda_Q.
  3. Hence TP<TQT_P < T_Q, so the answer is (d).
Report a mistake
Q148MHT CET 2021 · 22 SEP · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

If the temperature of the sun is doubled, the rate of energy received by the earth will be increased by a factor

Show answer and solution

Answer: (d)

  1. Power from the sun P∝T4P \propto T^4; energy received by the earth is proportional to PP.
  2. T→2T⇒P→24P=16PT \to 2T \Rightarrow P \to 2^4 P = 16P
  3. So the answer is (d) 16.
Report a mistake
Q149MHT CET 2021 · 21 SEP · SHIFT 1Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black reactangular surface of area 'aa' emits energy 'EE' per second at 27∘C27^\circ\text{C}. If length and breadth is reduced to (13)\left(\frac{1}{3}\right)rd of initial value and temperature is raised to 327∘C327^\circ\text{C} then energy emitted per second becomes

Show answer and solution

Answer: (a)

  1. E∝AT4E \propto A T^4.
  2. Length and breadth become 13\frac{1}{3}: A→A9A \to \frac{A}{9}.
  3. T:300 K→600 KT: 300\text{ K} \to 600\text{ K}, factor 1616.
  4. E′=16E9E' = \frac{16E}{9}, so the answer is (a).
Report a mistake
Q150MHT CET 2021 · 20 SEP · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

A black rectangular surface of area 'AA' emits energy 'EE' per second at 27∘C27^\circ\text{C}. If length and breadth is reduced to (1/3)(1/3)rd of its initial value and temperature is raised to 327∘C327^\circ\text{C} then energy emitted per second becomes

Show answer and solution

Answer: (c)

  1. E∝AT4E \propto A T^4.
  2. Length and breadth become 13\frac{1}{3}: A→A9A \to \frac{A}{9}.
  3. T:300 K→600 KT: 300\text{ K} \to 600\text{ K}, factor 1616.
  4. E′=16E9E' = \frac{16E}{9}, so the answer is (c).
Report a mistake
Q151NEET 2020 · PHASE 2Easy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Three stars A,B,CA, B, C have surface temperatures TA,TB,TCT_{A}, T_{B}, T_{C} respectively. Star AA appears bluish, star BB appears reddish and star CC yellowish. Hence,

Show answer and solution

Answer: (a)

  1. Wien's law: T∝1λmT \propto \dfrac{1}{\lambda_m}.
  2. Wavelengths: blue < yellow < red, so λA<λC<λB\lambda_A < \lambda_C < \lambda_B.
  3. Hence TA>TC>TBT_A > T_C > T_B, so the answer is (a).
Report a mistake
Q152MHT CET 2020 · 16 OCT · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two spherical black bodies of radius r1r_1 and r2r_2 with surface temperature T1T_1 and T2T_2 respectively, radiate same power, then r1:r2r_1 : r_2 is

Show answer and solution

Answer: (b)

  1. P∝r2T4P \propto r^2 T^4; equal power gives r12T14=r22T24r_1^2 T_1^4 = r_2^2 T_2^4.
  2. r1r2=(T2T1)2\frac{r_1}{r_2} = \left(\frac{T_2}{T_1}\right)^2
  3. So the answer is (b).
Report a mistake
Q153MHT CET 2019 · 3 MAY · SHIFT 1Easy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

The SI unit and dimensions of Stefan's constant σ\sigma in case of Stefan's law of radiation is

Show answer and solution

Answer: (d)

  1. E=σT4⇒σ=ET4E = \sigma T^4 \Rightarrow \sigma = \dfrac{E}{T^4}, with EE in J m−2^{-2} s−1^{-1}
  2. Unit: Jm2 s K4\dfrac{\text{J}}{\text{m}^2\,\text{s}\,\text{K}^4} (W m−2^{-2} K−4^{-4})
  3. Dimensions: [ML2T−2][L2][T][K4]=[M1L0T−3K−4]\dfrac{[ML^2T^{-2}]}{[L^2][T][K^4]} = [M^1L^0T^{-3}K^{-4}]
  4. So the answer is (d).
Report a mistake
Q154MHT CET 2019 · 2 MAY · SHIFT 2Medium

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

The maximum wavelength of radiation emitted by a star is 289.8 nm. Then intensity of radiation for the star is (Given: Stefan's constant =5.67×10−8 W m−2 K−4= 5.67 \times 10^{-8}\text{ W m}^{-2}\text{ K}^{-4}, Wien's constant, b=2898 μm Kb = 2898\,\mu\text{m K})

Show answer and solution

Answer: (c)

  1. Wien's law: T=bλm=2898×10−6289.8×10−9=104 KT = \frac{b}{\lambda_m} = \frac{2898 \times 10^{-6}}{289.8 \times 10^{-9}} = 10^4\text{ K}
  2. Intensity =σT4=5.67×10−8×1016= \sigma T^4 = 5.67 \times 10^{-8} \times 10^{16}
  3. =5.67×108 W m−2= 5.67 \times 10^{8}\text{ W m}^{-2}, so the answer is (c).
Report a mistake
Q155NEET 2018Medium

Thermal Radiation: Black Body, Stefan & Wien · Stefan + Wien combined

The power radiated by a black body is P and it radiates maximum energy at wavelength, λ\lambda0. If the temperature of the black body is now changed so that it radiates maximum energy at wavelength 34λ0\frac{3}{4}\lambda_0, the power radiated by it becomes nP. The value of n is

Show answer and solution

Answer: (c)

  1. Wien's law: T∝1λmT \propto \frac{1}{\lambda_m}, so λm′=34λ0⇒T′=43T\lambda_m' = \frac{3}{4}\lambda_0 \Rightarrow T' = \frac{4}{3}T.
  2. Power P∝T4⇒nP=(43)4PP \propto T^4 \Rightarrow nP = \left(\frac{4}{3}\right)^4 P
  3. n=25681n = \frac{256}{81}
  4. So the answer is (c) 25681\frac{256}{81}.
Report a mistake
Q156JEE Main 2014 · 19 APR · SHIFT 1Difficult

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A black coloured solid sphere of radius R and mass M is inside a cavity with vacuum inside. The walls of the cavity are maintained at a temperature T0. The initial temperature of the sphere is 3T0. If the specific heat of the material of the sphere varies as α\alphaT3 per unit mass with the temperature T of the sphere, where α\alpha is a constant, then the time taken for the sphere to cool down to temperature 2T0 will be (σ\sigma is Stefan Boltzmann constant)

Show answer and solution

Answer: (c)

  1. Net loss by radiation: −McdTdt=σ(4πR2)(T4−T04)-Mc\frac{dT}{dt} = \sigma (4\pi R^2)(T^4 - T_0^4) with c=αT3c = \alpha T^3.
  2. Mα4πR2σ∫3T02T0−T3 dTT4−T04=∫0tdt\frac{M\alpha}{4\pi R^2 \sigma} \int_{3T_0}^{2T_0} \frac{-T^3\,dT}{T^4 - T_0^4} = \int_0^t dt
  3. ∫T3dTT4−T04=14ln⁡(T4−T04)\int \frac{T^3 dT}{T^4 - T_0^4} = \frac{1}{4}\ln(T^4 - T_0^4), so t=Mα16πR2σln⁡81T04−T0416T04−T04t = \frac{M\alpha}{16\pi R^2\sigma}\ln\frac{81T_0^4 - T_0^4}{16T_0^4 - T_0^4}
  4. 8015=163⇒t=Mα16πR2σln⁡(163)\frac{80}{15} = \frac{16}{3} \Rightarrow t = \frac{M\alpha}{16\pi R^2\sigma}\ln\left(\frac{16}{3}\right)
  5. So the answer is (c).
Report a mistake
Q157JEE Main 2006 · AIEEEMedium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Assuming the Sun to be a spherical body of radius RR at a temperature of TKTK, evaluate the total radiant power incident on Earth at a distance rr from the Sun

Where r0 is the radius of the Earth and σ\sigma is Stefan's constant.

Show answer and solution

Answer: (b)

  1. Power of the sun: P=4πR2σT4P = 4\pi R^2 \sigma T^4.
  2. Intensity at distance rr: I=P4πr2=R2σT4r2I = \frac{P}{4\pi r^2} = \frac{R^2 \sigma T^4}{r^2}.
  3. Earth intercepts this over its cross-section πr02\pi r_0^2.
  4. PE=πr02R2σT4r2P_E = \pi r_0^2 R^2 \sigma \frac{T^4}{r^2}, so the answer is (b).
Report a mistake
Q158JEE Main 2004 · AIEEEMedium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

If the temperature of the sun were to increase from TT to 2T2T and its radius from RR to 2R2R, then the ratio of the radiant energy received on earth to what it was previously will be

Show answer and solution

Answer: (d)

  1. Energy received on earth ∝\propto power of the sun ∝R2T4\propto R^2 T^4.
  2. Ratio =22×24=4×16=64= 2^2 \times 2^4 = 4 \times 16 = 64
  3. So the answer is (d) 64.
Report a mistake
Q159JEE Main 2003 · AIEEEEasy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

The earth radiates in the infra-red region of the spectrum. The spectrum is correctly given by

Show answer and solution

Answer: (d)

  1. Earth's temperature is about 300 K, so by Wien's law λm=bT≈2.9×10−3300≈10 μm\lambda_m = \dfrac{b}{T} \approx \dfrac{2.9 \times 10^{-3}}{300} \approx 10\ \mu\text{m}, which is in the infra-red.
  2. The key uses Wien's law to explain why the earth's radiation lies in the infra-red.
  3. So the answer (as per key) is (d) Wien's law.
Report a mistake
Q160JEE Main 2002 · AIEEEEasy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Infrared radiation is detected by

Show answer and solution

Answer: (b)

  1. A pyrometer measures temperature from the thermal (infra-red) radiation a body emits.
  2. Spectrometer analyses spectra, photometer measures visible light; nanometer is a unit, not an instrument.
  3. So the answer is (b) pyrometer.
Report a mistake
Q161JEE Main 2002 · AIEEEEasy

Thermal Radiation: Black Body, Stefan & Wien · Wien's displacement law

Which of the following is more close to a black body?

Show answer and solution

Answer: (a)

  1. A black body absorbs nearly all radiation falling on it.
  2. Lamp-black / black board paint absorbs about 96-99% of incident radiation; leaves and roses reflect a lot of light.
  3. So the answer is (a) black board paint.
Report a mistake
Q162JEE Main 2002 · AIEEEMedium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

Two spheres of the same material have radii 1 m1\text{ m} and 4 m4\text{ m} and temperatures 4000 K4000\text{ K} and 2000 K2000\text{ K} respectively. The ratio of the energy radiated per second by the first sphere to that by the second is

Show answer and solution

Answer: (a)

  1. P∝r2T4P \propto r^2 T^4 for the same material.
  2. P1P2=(14)2(40002000)4=116×16=1\frac{P_1}{P_2} = \left(\frac{1}{4}\right)^2 \left(\frac{4000}{2000}\right)^4 = \frac{1}{16} \times 16 = 1
  3. So the answer is (a) 1:11 : 1.
Report a mistake
Q163NEET 1998 · AIPMTMedium

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

The radiant energy from the sun, incident normally at the surface of earth is 20 kcal/m2 min20\text{ kcal/m}^{2}\text{ min}. What would have been the radiant energy, incident normally on the earth, if the sun had a temperature, twice of the present one?

Show answer and solution

Answer: (c)

  1. Energy received on earth ∝\propto power of the sun ∝T4\propto T^4.
  2. T→2TT \to 2T gives a factor 24=162^4 = 16.
  3. 16×20=320 kcal/m2 min16 \times 20 = 320\text{ kcal/m}^2\text{ min}
  4. So the answer is (c) 320 kcal/m2 min320\text{ kcal/m}^2\text{ min}.
Report a mistake
Q164NEET 1997 · AIPMTEasy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

A black body is at a temperature of 500 K. It emits energy at a rate which is proportional to

Show answer and solution

Answer: (b)

  1. Stefan's law: E∝T4E \propto T^4 with TT in kelvin.
  2. E∝(500)4E \propto (500)^4
  3. So the answer is (b).
Report a mistake
Q165NEET 1993 · AIPMTEasy

Thermal Radiation: Black Body, Stefan & Wien · Stefan-Boltzmann law & radiated power

If the temperature of the sun is doubled, the rate of energy received on earth will be increased by a factor of

Show answer and solution

Answer: (d)

  1. Power emitted by the sun ∝T4\propto T^4; energy received on earth is a fixed fraction of it.
  2. E′E=24=16\dfrac{E'}{E} = 2^4 = 16
  3. So the answer is (d) 16.
Report a mistake
Q166MHT CET 2026 · 13 MAY · SHIFT 2Medium

Newton's Law of Cooling

Two hot bodies B1B_1 and B2B_2 have temperature 100∘100^\circC and 80∘80^\circC respectively at t=0t = 0. The temperature of the surroundings is 40∘40^\circC. The ratio of the respective rates of cooling R1R_1 and R2R_2 of these two bodies at t=0t = 0 will be

Show answer and solution

Answer: (a)

  1. Newton's law of cooling: rate ∝(T−T0)\propto (T - T_0).
  2. R1R2=100−4080−40=6040\frac{R_1}{R_2} = \frac{100 - 40}{80 - 40} = \frac{60}{40}
  3. So the answer is (a) R1:R2=3:2R_1 : R_2 = 3 : 2.
Report a mistake
Q167MHT CET 2026 · 18 APR · SHIFT 2Medium

Newton's Law of Cooling

A body cools from a temperature 3θ3\theta to 2θ2\theta in 10 minute. The room temperature is θ\theta. The temperature of the body at the end of the next 10 minute is 'xx'. Assuming that Newton's law of cooling is applicable, the value of 'xx' will be

Show answer and solution

Answer: (c)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. First 10 min: 3θ−2θ10=k(2.5θ−θ)⇒k=115\frac{3\theta - 2\theta}{10} = k(2.5\theta - \theta) \Rightarrow k = \frac{1}{15} per min
  3. Next 10 min: 2θ−x10=115(2θ+x2−θ)=x30\frac{2\theta - x}{10} = \frac{1}{15}\left(\frac{2\theta + x}{2} - \theta\right) = \frac{x}{30}
  4. 2θ−x=x3⇒x=32θ2\theta - x = \frac{x}{3} \Rightarrow x = \frac{3}{2}\theta
  5. So the answer is (c) 32θ\frac{3}{2}\theta.
Report a mistake
Q168MHT CET 2026 · 16 APR · SHIFT 2Medium

Newton's Law of Cooling

A bowl filled with very hot water cools from 98∘98^\circC to 86∘86^\circC in 2 minutes when the room temperature is 22∘22^\circC. How long it will take to cool from 75∘75^\circC to 69∘69^\circC?

Show answer and solution

Answer: (b)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. Case 1: 98−862=k(92−22)⇒6=70k\frac{98 - 86}{2} = k(92 - 22) \Rightarrow 6 = 70k
  3. Case 2: 75−69t=k(72−22)=50k\frac{75 - 69}{t} = k(72 - 22) = 50k
  4. Dividing: 6/t6=5070⇒t=1.4\frac{6/t}{6} = \frac{50}{70} \Rightarrow t = 1.4 min
  5. So the answer is (b) 1.41.4 minute.
Report a mistake
Q169MHT CET 2026 · 15 APR · SHIFT 1Medium

Newton's Law of Cooling

An ordinary body cools from 4θ4\theta to 3θ3\theta in 't' minutes. The temperature of the body after next 't' minutes is (Assume Newton's law of cooling and room temperature as θ\theta)

Show answer and solution

Answer: (b)

  1. Newton's law: T1−T2t=k(T1+T22−θ)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - \theta\right).
  2. First tt: θt=k(3.5θ−θ)=2.5kθ\frac{\theta}{t} = k(3.5\theta - \theta) = 2.5k\theta
  3. Next tt: 3θ−Tt=k(3θ+T2−θ)=kθ+T2\frac{3\theta - T}{t} = k\left(\frac{3\theta + T}{2} - \theta\right) = k\frac{\theta + T}{2}
  4. Dividing: 3θ−Tθ=θ+T5θ⇒15θ−5T=θ+T⇒T=7θ3\frac{3\theta - T}{\theta} = \frac{\theta + T}{5\theta} \Rightarrow 15\theta - 5T = \theta + T \Rightarrow T = \frac{7\theta}{3}
  5. So the answer is (b) 7θ3\frac{7\theta}{3}.
Report a mistake
Q170MHT CET 2026 · 11 APR · SHIFT 2Medium

Newton's Law of Cooling

A body cools in 77 minutes from 60∘60^\circ C to 40∘40^\circ C. What time (in minutes) does it take to cool from 40∘40^\circC to 28∘28^\circ C, if its surrounding temperature is 10∘10^\circC? (Newton's law of cooling holds good)

Show answer and solution

Answer: (d)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. Case 1: 207=k(50−10)=40k⇒k=114\frac{20}{7} = k(50 - 10) = 40k \Rightarrow k = \frac{1}{14}
  3. Case 2: 12t=114(34−10)=2414\frac{12}{t} = \frac{1}{14}(34 - 10) = \frac{24}{14}
  4. t=7t = 7 min
  5. So the answer is (d) 77.
Report a mistake
Q171MHT CET 2025 · 25 APR · SHIFT 1Medium

Newton's Law of Cooling

A body cools from 80∘C80^\circ\text{C} to 50∘C50^\circ\text{C} in 5 min. In the next time of ' t ' in, the body continues to cool from 50∘C50^\circ\text{C} to 30∘C30^\circ\text{C}. The total time taken by the body to cool from 80∘C80^\circ\text{C} to 30∘C30^\circ\text{C} is [The temperature of the surroundings is 20∘C20^\circ\text{C}.]

Show answer and solution

Answer: (d)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. 80→5080 \to 50: 305=k(65−20)⇒k=215\frac{30}{5} = k(65 - 20) \Rightarrow k = \frac{2}{15}
  3. 50→3050 \to 30: 20t=215(40−20)⇒t=7.5\frac{20}{t} = \frac{2}{15}(40 - 20) \Rightarrow t = 7.5 min
  4. Total time =5+7.5=12.5= 5 + 7.5 = 12.5 min
  5. So the answer is (d) 12.5 min.
Report a mistake
Q172MHT CET 2025 · 21 APR · SHIFT 2Medium

Newton's Law of Cooling

Hot water cools from 80∘C80^\circ\text{C} to 60∘C60^\circ\text{C} in 1 minutes. In cooling from 60∘C60^\circ\text{C} to 50∘C50^\circ\text{C} it will take (room temperature =30∘C= 30^\circ\text{C})

Show answer and solution

Answer: (a)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. Case 1: 201=k(70−30)⇒k=12\frac{20}{1} = k(70 - 30) \Rightarrow k = \frac{1}{2} per min
  3. Case 2: 10t=12(55−30)=12.5⇒t=0.8\frac{10}{t} = \frac{1}{2}(55 - 30) = 12.5 \Rightarrow t = 0.8 min
  4. 0.80.8 min =48= 48 s
  5. So the answer is (a) 48 s.
Report a mistake
Q173MHT CET 2025 · 20 APR · SHIFT 2Medium

Newton's Law of Cooling

A metal sphere cools at a rate of 1.5∘C/min1.5^\circ\text{C/min} when its temperature is 80∘C80^\circ\text{C}. When the temperature of the sphere is 40∘C40^\circ\text{C}, its rate of cooling is 0.3∘C/min0.3^\circ\text{C/min}. The temperature of the surrounding (θ0)(\theta_0) is

Show answer and solution

Answer: (a)

  1. Newton's law: rate ∝(T−θ0)\propto (T - \theta_0).
  2. 1.50.3=80−θ040−θ0=5\frac{1.5}{0.3} = \frac{80 - \theta_0}{40 - \theta_0} = 5
  3. 80−θ0=200−5θ0⇒θ0=30∘80 - \theta_0 = 200 - 5\theta_0 \Rightarrow \theta_0 = 30^\circC
  4. So the answer is (a) 30∘30^\circC.
Report a mistake
Q174MHT CET 2025 · 20 APR · SHIFT 1Medium

Newton's Law of Cooling

A body cools from 60∘C60^\circ\text{C} to 40∘C40^\circ\text{C} in 6 minutes. After next 6 minutes its temperature will be (Temperature of the surroundings is 10∘C10^\circ\text{C})

Show answer and solution

Answer: (b)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. First 6 min: 206=k(50−10)⇒k=112\frac{20}{6} = k(50 - 10) \Rightarrow k = \frac{1}{12}
  3. Next 6 min: 40−T6=112(40+T2−10)⇒40−T=T+204\frac{40 - T}{6} = \frac{1}{12}\left(\frac{40 + T}{2} - 10\right) \Rightarrow 40 - T = \frac{T + 20}{4}
  4. 160−4T=T+20⇒T=28∘160 - 4T = T + 20 \Rightarrow T = 28^\circC
  5. So the answer is (b) 28∘28^\circC.
Report a mistake
Q175JEE Main 2025 · 29 JAN · SHIFT 2Medium

Newton's Law of Cooling

A cup of coffee cools from 90°C to 80°C in t minutes when the room temperature is 20°C. The time taken by the similar cup of coffee to cool from 80°C to 60°C at the same room temperature is:

Show answer and solution

Answer: (a)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. 90→8090 \to 80: 10t=k(85−20)=65k\frac{10}{t} = k(85 - 20) = 65k
  3. 80→6080 \to 60: 20t′=k(70−20)=50k\frac{20}{t'} = k(70 - 20) = 50k
  4. Dividing: t′t=2010×6550=135\frac{t'}{t} = \frac{20}{10}\times\frac{65}{50} = \frac{13}{5}
  5. So the answer is (a) 135t\frac{13}{5}t.
Report a mistake
Q176JEE Main 2025 · 24 JAN · SHIFT 2Medium

Newton's Law of Cooling

The temperature of a body in air falls from 40∘C40^\circ\text{C} to 24∘C24^\circ\text{C} in 4 minutes. The temperature of the air is 16∘C16^\circ\text{C}. The temperature of the body in the next 4 minutes will be:

Show answer and solution

Answer: (b)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. First 4 min: 164=k(32−16)⇒k=14\frac{16}{4} = k(32 - 16) \Rightarrow k = \frac{1}{4}
  3. Next 4 min: 24−T4=14(24+T2−16)⇒24−T=T−82\frac{24 - T}{4} = \frac{1}{4}\left(\frac{24 + T}{2} - 16\right) \Rightarrow 24 - T = \frac{T - 8}{2}
  4. 48−2T=T−8⇒T=563∘48 - 2T = T - 8 \Rightarrow T = \frac{56}{3}^\circC
  5. So the answer is (b) 563∘\frac{56}{3}{}^\circC.
Report a mistake
Q177MHT CET 2025 · 26 APR · SHIFT 2Difficult

Newton's Law of Cooling

A calorimeter contains 10 g of water at 20∘C20^\circ\text{C}. The temperature fall to 15∘C15^\circ\text{C} in 10 min. When calorimeter contains 20 g of water at 20∘C20^\circ\text{C}, it takes 15 min. for the temperature to become 15∘C15^\circ\text{C}. The water equivalent at the calorimeter is

Show answer and solution

Answer: (c)

  1. Same calorimeter and same temperature range, so the rate of heat loss is the same in both cases.
  2. (m1+W)ΔTt1=(m2+W)ΔTt2\frac{(m_1 + W)\Delta T}{t_1} = \frac{(m_2 + W)\Delta T}{t_2}
  3. 10+W10=20+W15⇒150+15W=200+10W\frac{10 + W}{10} = \frac{20 + W}{15} \Rightarrow 150 + 15W = 200 + 10W
  4. W=10W = 10 g
  5. So the answer is (c) 10 g.
Report a mistake
Q178MHT CET 2024 · 16 MAY · SHIFT 1Medium

Newton's Law of Cooling

A bucket full of hot water is kept in a room. If it cools from 75∘C75^\circ\text{C} to 70∘C70^\circ\text{C} in t1t_1 minutes, from 70∘C70^\circ\text{C} to 65∘C65^\circ\text{C} in t2t_2 minutes and 65∘C65^\circ\text{C} to 60∘C60^\circ\text{C} in t3t_3 minutes, then

Show answer and solution

Answer: (a)

  1. Newton's law: rate of cooling ∝\propto (body temperature −- room temperature).
  2. Each step is the same 5∘5^\circC drop, but the average excess temperature gets smaller each time.
  3. Smaller rate means more time for the same drop.
  4. So the answer is (a) t1<t2<t3t_1 < t_2 < t_3.
Report a mistake
Q179MHT CET 2024 · 10 MAY · SHIFT 2Medium

Newton's Law of Cooling

An ordinary body cools from ' 4θ′4\theta' ' to ' 3θ′3\theta' ' in ' t ' minutes. The temperature of that body after next 't' minutes is (Assume Newton's law of cooling and room temperature is θ\theta)

Show answer and solution

Answer: (d)

  1. Newton's law: T1−T2t=k(T1+T22−θ)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - \theta\right).
  2. First tt: θt=k(3.5θ−θ)=2.5kθ\frac{\theta}{t} = k(3.5\theta - \theta) = 2.5k\theta
  3. Next tt: 3θ−Tt=kθ+T2\frac{3\theta - T}{t} = k\frac{\theta + T}{2}
  4. Dividing: 15θ−5T=θ+T⇒T=7θ315\theta - 5T = \theta + T \Rightarrow T = \frac{7\theta}{3}
  5. So the answer is (d) 7θ3\frac{7\theta}{3}.
Report a mistake
Q180MHT CET 2024 · 9 MAY · SHIFT 2Medium

Newton's Law of Cooling

The temperature of a liquid falls from 365 K to 359 K in 3 minutes. The time during which temperature of this liquid falls from 342 K to 338 K is [Let the room temperature be 296 K ]

Show answer and solution

Answer: (c)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. Case 1: 63=k(362−296)=66k⇒k=133\frac{6}{3} = k(362 - 296) = 66k \Rightarrow k = \frac{1}{33}
  3. Case 2: 4t=133(340−296)=4433\frac{4}{t} = \frac{1}{33}(340 - 296) = \frac{44}{33}
  4. t=3t = 3 min
  5. So the answer is (c) 3 min.
Report a mistake
Q181MHT CET 2023 · 14 MAY · SHIFT 2Medium

Newton's Law of Cooling

A metal rod cools at the rate of 4∘C/min4^\circ\text{C/min} when its temperature is 90∘C90^\circ\text{C} and the rate of 1∘C/m1^\circ\text{C/m}in when its temperature is 30∘C30^\circ\text{C}. The temperature of the surrounding is

Show answer and solution

Answer: (c)

  1. Newton's law: rate ∝(T−θ0)\propto (T - \theta_0).
  2. 41=90−θ030−θ0\frac{4}{1} = \frac{90 - \theta_0}{30 - \theta_0}
  3. 120−4θ0=90−θ0⇒θ0=10∘120 - 4\theta_0 = 90 - \theta_0 \Rightarrow \theta_0 = 10^\circC
  4. So the answer is (c) 10∘10^\circC.
Report a mistake
Q182JEE Main 2022 · 27 JUL · SHIFT 1Medium

Newton's Law of Cooling

Read the following statements:

A. When small temperature difference between a liquid and its surrounding is doubled, the rate of loss of heat of the liquid becomes twice.

B. Two bodies PP and QQ having equal surface areas are maintained at temperature 10∘C10^\circ\text{C} and 20∘C20^\circ\text{C}. The thermal radiation emitted in a given time by PP and QQ are in the ratio 1:1.151 : 1.15. C. A Carnot Engine working between 100 K100\text{ K} and 400 K400\text{ K} has an efficiency of 75%75\%.

D. When small temperature difference between a liquid and its surrounding is quadrupled, the rate of loss of heat of the liquid becomes twice.

Choose the correct answer from the options given below:

Show answer and solution

Answer: (a)

  1. A: Newton's law, rate ∝ΔT\propto \Delta T, so doubling ΔT\Delta T doubles the rate. True.
  2. B: EPEQ=(283293)4≈11.15\frac{E_P}{E_Q} = \left(\frac{283}{293}\right)^4 \approx \frac{1}{1.15}. True.
  3. C: η=1−100400=0.75=75%\eta = 1 - \frac{100}{400} = 0.75 = 75\%. True.
  4. D: quadrupling ΔT\Delta T makes the rate four times, not twice. False.
  5. So the answer is (a) A, B, C only.
Report a mistake
Q183MHT CET 2021 · 24 SEP · SHIFT 2Medium

Newton's Law of Cooling

A metal sphere cools at the rate of 1.5∘C/min1.5^\circ\text{C/min} when its temperature is 80∘C80^\circ\text{C}. At what rate will it cool when its temperature falls to 50∘C50^\circ\text{C}. [Temperature of surrounding is 30∘C30^\circ\text{C}]

Show answer and solution

Answer: (b)

  1. Newton's law: rate ∝(T−θ0)\propto (T - \theta_0).
  2. R1.5=50−3080−30=25\frac{R}{1.5} = \frac{50 - 30}{80 - 30} = \frac{2}{5}
  3. R=0.6∘R = 0.6^\circC/min
  4. So the answer is (b) 0.6∘0.6^\circC/min.
Report a mistake
Q184NEET 2021Medium

Newton's Law of Cooling

A cup of coffee cools from 90∘^\circ C to 80∘^\circC in t minutes, when the room temperature is 20∘^\circ C. The time taken by a similar cup of coffee to cool from 80∘^\circC to 60∘^\circC at a room temperature same at 20∘^\circC is:

Show answer and solution

Answer: (c)

  1. Newton's law: T1−T2t=k(T1+T22−T0)\frac{T_1 - T_2}{t} = k\left(\frac{T_1 + T_2}{2} - T_0\right).
  2. 90→8090 \to 80: 10t=k(85−20)=65k\frac{10}{t} = k(85 - 20) = 65k
  3. 80→6080 \to 60: 20t′=k(70−20)=50k\frac{20}{t'} = k(70 - 20) = 50k
  4. Dividing: t′t=2010×6550=135\frac{t'}{t} = \frac{20}{10}\times\frac{65}{50} = \frac{13}{5}
  5. So the answer is (c) 135t\frac{13}{5}t.
Report a mistake
Q185JEE Main 2019 · 8 APR · SHIFT 1Medium

Newton's Law of Cooling

Two identical beakers A and B contain equal volumes of two different liquids at 60°C each and left to cool down. Liquid in A has density of 8 × 102 kg/m3 and specific heat of 2000 J kg–1 K–1 while liquid in B has density of 103 kg m–3 and specific heat of 4000 J kg–1 K–1. Which of the following best describes their temperature versus time graph schematically? (assume the emissivity of both the beakers to be the same)

Show answer and solution

Answer: (b)

  1. Same volume VV, same area and emissivity, so the heat loss rate is the same for both at the same temperature.
  2. Rate of fall dTdt=heat loss rateρVc∝1ρc\frac{dT}{dt} = \frac{\text{heat loss rate}}{\rho V c} \propto \frac{1}{\rho c}
  3. A: ρc=800×2000=1.6×106\rho c = 800 \times 2000 = 1.6\times10^6; B: ρc=1000×4000=4×106\rho c = 1000 \times 4000 = 4\times10^6
  4. A has smaller ρc\rho c, so A cools faster and its curve lies below B's at all times.
  5. So the answer is (b).
Report a mistake